Tempered safety glass cleanroom observation window

クリーンルームのドア、窓およびインターロックシステム

Tempered 安全ガラスのクリーンルームの窓

A fixed observation window centered on heat-treated tempered safety glass, providing clear process visibility and improved resistance to accidental human impact.

Heat-Treated Safety Glass
Clear High-Visibility Pane
Finished Glass Edges
Sealed Hygienic Mounting

見積もりリクエスト製品案内

商品紹介

This window specifies tempered safety glass as the primary performance feature. The pane is cut, edge-worked and drilled before heat treatment, then installed in a cleanroom frame with continuous resilient support. Tempered glass offers substantially greater strength than ordinary annealed glass of the same thickness and breaks into small fragments rather than large sharp shards. It is suited to doorside observation zones, personnel routes and larger internal panes where accidental impact is a design concern.

主要な特徴

Heat treatment places the glass surfaces in compression for greater resistance to impact and temperature differentials.

Safety-fracture behavior reduces the risk associated with large sharp glass pieces after breakage.

Clear low-distortion glazing maintains direct operator sightlines through controlled-area partitions.

Continuous gasket or silicone support avoids hard point loading at the pane edge.

お客様の製品に関する懸念事項

Safety glazing must be specified at the correct thickness and supported uniformly because all cutting and edge work must be completed before tempering.

Ordinary glass is vulnerable to accidental contact from carts or personnel.Tempered safety glass provides greater impact strength than annealed glass of the same thickness.

Edge damage during installation can initiate later glass failure.Finished edges, setting blocks and continuous resilient glazing keep the pane away from hard metal contact.

Late field drilling or trimming is requested after the opening changes.The pane is manufactured to final dimensions before tempering, with the frame adjusted rather than cutting the finished glass.

典型的な用途

Cleanroom personnel corridorsDoor-adjacent observation panelsLaboratory viewing partitionsMedical-device production rooms

技術的なパラメータ

Common tempered-glass and cleanroom-frame ranges are listed below; final pane thickness depends on size and support conditions.

コア材料	Clear heat-treated tempered soda-lime safety glass
パネルの厚さ	6, 8, 10 or 12 mm glass; thicker panes available for larger openings
有効幅	300–2000 mm clear viewing width
最大長さ	3000 mm typical cleanroom-window height
鋼鉄の厚さを直面する	1.0–1.5 mm for optional stainless frame; 0 mm for aluminum frame
コア密度	Approximately 2500 kg/m³
熱伝導率	Approximately 1.0 W/(m·K)
表面仕上げ	Clear polished glass with ground or polished safety edges and optional ceramic-frit border
ジョイントタイプ	Four-side supported fixed glazing with EPDM gasket or neutral-cure structural silicone
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Low-iron tempered glassHeat-soaked tempered glassCeramic-frit privacy borderSingle or double-glazed assembly

Planning a Tempered Safety Glass Cleanroom Window specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する