English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أبواب الغرف النظيفة ونوافذ وأنظمة التشابك
Tempered زجاج السلامة نافذة غرف الأبحاث
A fixed observation window centered on heat-treated tempered safety glass, providing clear process visibility and improved resistance to accidental human impact.
- Heat-Treated Safety Glass
- Clear High-Visibility Pane
- Finished Glass Edges
- Sealed Hygienic Mounting
مقدمة المنتج
This window specifies tempered safety glass as the primary performance feature. The pane is cut, edge-worked and drilled before heat treatment, then installed in a cleanroom frame with continuous resilient support. Tempered glass offers substantially greater strength than ordinary annealed glass of the same thickness and breaks into small fragments rather than large sharp shards. It is suited to doorside observation zones, personnel routes and larger internal panes where accidental impact is a design concern.
الخصائص الرئيسية
Safety-fracture behavior reduces the risk associated with large sharp glass pieces after breakage.
Clear low-distortion glazing maintains direct operator sightlines through controlled-area partitions.
Continuous gasket or silicone support avoids hard point loading at the pane edge.
مخاوف المنتج للعملاء
Safety glazing must be specified at the correct thickness and supported uniformly because all cutting and edge work must be completed before tempering.
Ordinary glass is vulnerable to accidental contact from carts or personnel.Tempered safety glass provides greater impact strength than annealed glass of the same thickness.
Edge damage during installation can initiate later glass failure.Finished edges, setting blocks and continuous resilient glazing keep the pane away from hard metal contact.
Late field drilling or trimming is requested after the opening changes.The pane is manufactured to final dimensions before tempering, with the frame adjusted rather than cutting the finished glass.
تطبيقات نموذجية
Cleanroom personnel corridorsDoor-adjacent observation panelsLaboratory viewing partitionsMedical-device production rooms
المعلمات الفنية
Common tempered-glass and cleanroom-frame ranges are listed below; final pane thickness depends on size and support conditions.
| المواد الأساسية | Clear heat-treated tempered soda-lime safety glass |
|---|---|
| سمك اللوحة | 6, 8, 10 or 12 mm glass; thicker panes available for larger openings |
| العرض الفعال | 300–2000 mm clear viewing width |
| الحد الأقصى الطول | 3000 mm typical cleanroom-window height |
| الصلب يواجه سمك | 1.0–1.5 mm for optional stainless frame; 0 mm for aluminum frame |
| الكثافة الأساسية | Approximately 2500 kg/m³ |
| الموصلية الحرارية | Approximately 1.0 W/(m·K) |
| إنهاء السطح | Clear polished glass with ground or polished safety edges and optional ceramic-frit border |
| نوع المشترك | Four-side supported fixed glazing with EPDM gasket or neutral-cure structural silicone |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Low-iron tempered glassHeat-soaked tempered glassCeramic-frit privacy borderSingle or double-glazed assembly
Planning a Tempered Safety Glass Cleanroom Window specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
