Tempered safety glass cleanroom observation window

클린룸 도어, 창문 및 인터락 시스템

Tempered Safety Glass Cleanroom 창

A fixed observation window centered on heat-treated tempered safety glass, providing clear process visibility and improved resistance to accidental human impact.

Heat-Treated Safety Glass
Clear High-Visibility Pane
Finished Glass Edges
Sealed Hygienic Mounting

견적 요청 제품 찾아보기

상품 소개

This window specifies tempered safety glass as the primary performance feature. The pane is cut, edge-worked and drilled before heat treatment, then installed in a cleanroom frame with continuous resilient support. Tempered glass offers substantially greater strength than ordinary annealed glass of the same thickness and breaks into small fragments rather than large sharp shards. It is suited to doorside observation zones, personnel routes and larger internal panes where accidental impact is a design concern.

주요 기능

Heat treatment places the glass surfaces in compression for greater resistance to impact and temperature differentials.

Safety-fracture behavior reduces the risk associated with large sharp glass pieces after breakage.

Clear low-distortion glazing maintains direct operator sightlines through controlled-area partitions.

Continuous gasket or silicone support avoids hard point loading at the pane edge.

고객 제품 관심사

Safety glazing must be specified at the correct thickness and supported uniformly because all cutting and edge work must be completed before tempering.

Ordinary glass is vulnerable to accidental contact from carts or personnel.Tempered safety glass provides greater impact strength than annealed glass of the same thickness.

Edge damage during installation can initiate later glass failure.Finished edges, setting blocks and continuous resilient glazing keep the pane away from hard metal contact.

Late field drilling or trimming is requested after the opening changes.The pane is manufactured to final dimensions before tempering, with the frame adjusted rather than cutting the finished glass.

일반적인 응용 프로그램

Cleanroom personnel corridorsDoor-adjacent observation panelsLaboratory viewing partitionsMedical-device production rooms

기술 매개변수

Common tempered-glass and cleanroom-frame ranges are listed below; final pane thickness depends on size and support conditions.

핵심 재료	Clear heat-treated tempered soda-lime safety glass
패널 두께	6, 8, 10 or 12 mm glass; thicker panes available for larger openings
유효 폭	300–2000 mm clear viewing width
최대 길이	3000 mm typical cleanroom-window height
강철 면면 두께	1.0–1.5 mm for optional stainless frame; 0 mm for aluminum frame
코어 밀도	Approximately 2500 kg/m³
열전도도 (Thermal Conductivity)	Approximately 1.0 W/(m·K)
표면 마무리	Clear polished glass with ground or polished safety edges and optional ceramic-frit border
접합 유형	Four-side supported fixed glazing with EPDM gasket or neutral-cure structural silicone
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Low-iron tempered glassHeat-soaked tempered glassCeramic-frit privacy borderSingle or double-glazed assembly

Planning a Tempered Safety Glass Cleanroom Window specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.