Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Personal und Material Dekontamination Ausrüstung
Static Cleanroom Pass Box
A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.
- Non-Ventilated Transfer Chamber
- Dual-Door Interlock
- Smooth Lipless Interior
- Compression Door Seals
Produkteinführung
The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.
Key Features
A lipless sill supports smooth, obstruction-free transfer.
Compression latches draw the door against a continuous perimeter gasket.
A glazed panel permits visual confirmation before access.
Mechanical or electrical one-door-at-a-time operation can be selected.
Kunden Produktbedenken
A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.
A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.
Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.
Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.
Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.
Typische Anwendungen
Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement
Technische Parameter
Typical construction ranges for a static wall-mounted pass box are listed below.
| Core Material | Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals |
|---|---|
| Panel Dicke | 50-80 mm double-wall cabinet construction |
| Effektive Breite | 400-1000 mm clear transfer width |
| Maximale Länge | Up to 1200 mm chamber depth |
| Stahl facing Dicke | 1,0 - 1,5 mm Edelstahl-Verschnitte |
| Kerndichte | 35-40 kg/m³ polyurethane service-void insulation |
| Thermische Leitfähigkeit | 0.022-0.028 W/(m·K) for polyurethane double-wall infill |
| Oberfläche Finish | Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber |
| Gemeinsamer Typ | Sealed folded or welded body with mechanically or electrically interlocked compression doors |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame
Planning a Static Cleanroom Pass Box specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
