Three-quarter view of a static stainless-steel cleanroom pass box

Peralatan Dekontaminasi Personil dan Bahan

Kotak Pass Cleanroom Statik

A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.

Non-Ventilated Transfer Chamber
Dual-Door Interlock
Smooth Lipless Interior
Compression Door Seals

Perkenalan produk

The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.

Fitur utama:

The concealed interlock is protected from impact by trays and cartons.

A lipless sill supports smooth, obstruction-free transfer.

Compression latches draw the door against a continuous perimeter gasket.

A glazed panel permits visual confirmation before access.

Mechanical or electrical one-door-at-a-time operation can be selected.

Kekhawatiran produk pelanggan

A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.

A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.

Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.

Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.

Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.

Aplikasi yang Tipis

Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement

Parameter teknis

Typical construction ranges for a static wall-mounted pass box are listed below.

Bahan inti	Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals
Ketebalan Panel (Panel Thickness)	50-80 mm double-wall cabinet construction
Efektif lebar	400-1000 mm clear transfer width
Panjang maksimum	Up to 1200 mm chamber depth
Baja menghadap ketebalan	1.0-1.5 mm stainless-steel facing
Kepadatan inti (core density)	35-40 kg/m³ polyurethane service-void insulation
Konduktivitas Termal (Thermal Conductivity)	0.022-0.028 W/(m·K) for polyurethane double-wall infill
Permukaan selesai	Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber
Jenis Bersama	Sealed folded or welded body with mechanically or electrically interlocked compression doors
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame

Planning a Static Cleanroom Pass Box specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami