Three-quarter view of a static stainless-steel cleanroom pass box

인력 및 재료 오염 제거 장비

정적 클린룸 패스 상자

A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.

Non-Ventilated Transfer Chamber
Dual-Door Interlock
Smooth Lipless Interior
Compression Door Seals

견적 요청 제품 찾아보기

상품 소개

The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.

주요 기능

The concealed interlock is protected from impact by trays and cartons.

A lipless sill supports smooth, obstruction-free transfer.

Compression latches draw the door against a continuous perimeter gasket.

A glazed panel permits visual confirmation before access.

Mechanical or electrical one-door-at-a-time operation can be selected.

고객 제품 관심사

A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.

A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.

Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.

Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.

Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.

일반적인 응용 프로그램

Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement

기술 매개변수

Typical construction ranges for a static wall-mounted pass box are listed below.

핵심 재료	Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals
패널 두께	50-80 mm double-wall cabinet construction
유효 폭	400-1000 mm clear transfer width
최대 길이	Up to 1200 mm chamber depth
강철 면면 두께	1. 0 - 1. 5 mm 스테인레스 스틸 면재
코어 밀도	35-40 kg/m³ polyurethane service-void insulation
열전도도 (Thermal Conductivity)	0.022-0.028 W/(m·K) for polyurethane double-wall infill
표면 마무리	Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber
접합 유형	Sealed folded or welded body with mechanically or electrically interlocked compression doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame

Planning a Static Cleanroom Pass Box specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.