Three-quarter view of a static stainless-steel cleanroom pass box

人員 · 材料の汚染除去設備

静的クリーンルームパスボックス

A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.

Non-Ventilated Transfer Chamber
Dual-Door Interlock
Smooth Lipless Interior
Compression Door Seals

商品紹介

The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.

主要な特徴

The concealed interlock is protected from impact by trays and cartons.

A lipless sill supports smooth, obstruction-free transfer.

Compression latches draw the door against a continuous perimeter gasket.

A glazed panel permits visual confirmation before access.

Mechanical or electrical one-door-at-a-time operation can be selected.

お客様の製品に関する懸念事項

A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.

A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.

Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.

Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.

Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.

典型的な用途

Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement

技術的なパラメータ

Typical construction ranges for a static wall-mounted pass box are listed below.

コア材料	Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals
パネルの厚さ	50-80 mm double-wall cabinet construction
有効幅	400-1000 mm clear transfer width
最大長さ	Up to 1200 mm chamber depth
鋼鉄の厚さを直面する	1.0 — 1.5mm ステンレス鋼の面
コア密度	35-40 kg/m³ polyurethane service-void insulation
熱伝導率	0.022-0.028 W/(m·K) for polyurethane double-wall infill
表面仕上げ	Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber
ジョイントタイプ	Sealed folded or welded body with mechanically or electrically interlocked compression doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame

Planning a Static Cleanroom Pass Box specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する