Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de descontaminación de personal y material
Caja de pase de sala limpia estática por
A non-ventilated stainless transfer cabinet that separates two rooms through sealed, interlocked doors.
- Non-Ventilated Transfer Chamber
- Dual-Door Interlock
- Smooth Lipless Interior
- Compression Door Seals
Introducción del producto
The static pass box creates an enclosed material route through a cleanroom partition without its own fan or filter. Its double-wall stainless body conceals the interlock outside the payload space, and the flush internal chamber can be wiped without ledges. This simple configuration is suited to short transfers between compatible clean areas.
Características clave
A lipless sill supports smooth, obstruction-free transfer.
Compression latches draw the door against a continuous perimeter gasket.
A glazed panel permits visual confirmation before access.
Mechanical or electrical one-door-at-a-time operation can be selected.
Preocupaciones del producto del cliente
A passive pass box must preserve the wall opening and prevent direct room-to-room exposure.
A direct hatch lets air and particles pass between rooms.Two sealed doors create an intermediate transfer volume.
Exposed hardware collects dirt and is damaged by loads.The interlock is isolated behind the double-wall chamber.
Raised sills snag cartons and retain debris.A flush lipless transfer surface removes the ledge.
Door gaskets seal unevenly around the perimeter.Compression latches apply repeatable closure force along the door edge.
Aplicaciones típicas
Pharmaceutical packaging transferMedical-device componentsElectronics cleanroomsLaboratory sample movement
Parámetros técnicos
Typical construction ranges for a static wall-mounted pass box are listed below.
| Materiales Core | Double-wall SUS 304 cabinet with polyurethane-insulated service void, glazed doors and silicone seals |
|---|---|
| Panel de espesor | 50-80 mm double-wall cabinet construction |
| Ancho efectivo | 400-1000 mm clear transfer width |
| Longitud máxima | Up to 1200 mm chamber depth |
| Acero frente a espesor | 1.0-1.5 mm stainless-steel facing |
| Densidad Core | 35-40 kg/m³ polyurethane service-void insulation |
| Conductividad térmica | 0.022-0.028 W/(m·K) for polyurethane double-wall infill |
| Superficie acabada | Brushed SUS 304 with smooth flush interior seams and optional electropolished chamber |
| Tipo conjunto | Sealed folded or welded body with mechanically or electrically interlocked compression doors |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Mechanical or electronic interlockSUS 304 or SUS 316L bodyOpaque or glazed doorsWall-thickness trim frame
Planning a Static Cleanroom Pass Box specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
