Four-way stainless cleanroom pallet with closed slatted deck and blue corners

Móveis de sala limpa e produtos de aço inoxidável

Palete de sala limpa de aço inoxidável

A formed Type 304 stainless four-way cleanroom pallet with a closed slatted deck, sealed box runners, reinforced fork openings and replaceable blue corner protectors.

Four-way fork entry
Closed formed deck slats
Sealed stainless runners
Replaceable blue corner guards

Solicite um orçamento. Browse produtos

Introdução do produto

The stainless steel cleanroom pallet replaces porous timber and corroding painted steel under bulk material loads. Formed Type 304 deck slats interlock into a continuous upper surface with narrow drainage seams rather than open wood-style boards. Three sealed box runners carry the load and provide full-length two-way entry, while reinforced notches through the outer runners create cross-entry for pallet forks. Cobalt-blue replaceable protectors cover the four impact-prone corners without obscuring the stainless deck or fork pockets.

Características-chave

Formed stainless deck slats present a closed, wipeable upper load surface.

Three sealed box runners avoid open hollow sections along the pallet underside.

Reinforced cross-entry notches create four-way fork access without cutting through an unsupported skin.

Blue replaceable corner guards identify impact points and protect door jambs during transfer.

Preocupações do produto do cliente

A reusable cleanroom pallet must tolerate cleaning, remain closed against debris and accept common fork directions without the pores or coatings associated with conventional pallets.

Timber fibres and damaged fasteners enter the controlled material route.The pallet uses formed stainless deck members and welded runners without wood or exposed nails.

Open tubular ends retain wash water and hide residue.All box runners terminate with continuously welded stainless closure plates.

Two-way pallets force lift trucks to approach from a constrained aisle direction.Reinforced side notches combine with full runner openings to provide four-way entry.

Bare metal corners damage cleanroom doors during repeated handling.Four cobalt-blue replaceable corner guards form controlled non-marking impact points.

Aplicações típicas

Z Materiais farmacêuticos StagingClean food ingredient logisticsMedical-device bulk component transferControlled warehouse palletizingWashdown cleanroom material handling

Parâmetros técnicos

Typical configurable specifications for a formed four-way Type 304 cleanroom pallet are listed below.

Material principal	Formed Type 304 stainless deck slats and sealed runners with cobalt-blue replaceable polyurethane corner guards
Painel de espessura	0.8 mm formed deck slats with 1.5 mm reinforcement sections
Largura efetiva	1100 mm nominal pallet width
Comprimento máximo	1100 mm nominal pallet length
Aço enfrentando espessura	0.8 mm Type 304 deck skin; 1.5 mm runner and fork-pocket reinforcement
Densidade Core	7900–8000 kg/m³ for Type 304 stainless components
Condutividade térmica	14 - 17 W / (m · K) para componentes inoxidáveis Tipo 304
Superfície acabado	Uniform satin-brushed stainless load surface with passivated welds and cobalt-blue corner guards
Tipo conjunto	Mechanically interlocked formed deck slats welded to three sealed runners with reinforced four-way fork pockets
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

1200 × 1000 mm footprintType 316L constructionPerforated drainage deckConductive corner protectors

Planning a Stainless Steel Cleanroom Pallet specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe