Four-way stainless cleanroom pallet with closed slatted deck and blue corners

クリーンルーム家具 · ステンレス製品

ステンレス鋼のクリーンルームパレット

A formed Type 304 stainless four-way cleanroom pallet with a closed slatted deck, sealed box runners, reinforced fork openings and replaceable blue corner protectors.

Four-way fork entry
Closed formed deck slats
Sealed stainless runners
Replaceable blue corner guards

見積もりリクエスト製品案内

商品紹介

The stainless steel cleanroom pallet replaces porous timber and corroding painted steel under bulk material loads. Formed Type 304 deck slats interlock into a continuous upper surface with narrow drainage seams rather than open wood-style boards. Three sealed box runners carry the load and provide full-length two-way entry, while reinforced notches through the outer runners create cross-entry for pallet forks. Cobalt-blue replaceable protectors cover the four impact-prone corners without obscuring the stainless deck or fork pockets.

主要な特徴

Formed stainless deck slats present a closed, wipeable upper load surface.

Three sealed box runners avoid open hollow sections along the pallet underside.

Reinforced cross-entry notches create four-way fork access without cutting through an unsupported skin.

Blue replaceable corner guards identify impact points and protect door jambs during transfer.

お客様の製品に関する懸念事項

A reusable cleanroom pallet must tolerate cleaning, remain closed against debris and accept common fork directions without the pores or coatings associated with conventional pallets.

Timber fibres and damaged fasteners enter the controlled material route.The pallet uses formed stainless deck members and welded runners without wood or exposed nails.

Open tubular ends retain wash water and hide residue.All box runners terminate with continuously welded stainless closure plates.

Two-way pallets force lift trucks to approach from a constrained aisle direction.Reinforced side notches combine with full runner openings to provide four-way entry.

Bare metal corners damage cleanroom doors during repeated handling.Four cobalt-blue replaceable corner guards form controlled non-marking impact points.

典型的な用途

Pharmaceutical material stagingClean food ingredient logisticsMedical-device bulk component transferControlled warehouse palletizingWashdown cleanroom material handling

技術的なパラメータ

Typical configurable specifications for a formed four-way Type 304 cleanroom pallet are listed below.

コア材料	Formed Type 304 stainless deck slats and sealed runners with cobalt-blue replaceable polyurethane corner guards
パネルの厚さ	0.8 mm formed deck slats with 1.5 mm reinforcement sections
有効幅	1100 mm nominal pallet width
最大長さ	1100 mm nominal pallet length
鋼鉄の厚さを直面する	0.8 mm Type 304 deck skin; 1.5 mm runner and fork-pocket reinforcement
コア密度	7900–8000 kg/m³ for Type 304 stainless components
熱伝導率	タイプ 304 ステンレス部品用 14 〜 17 W / （m · K）
表面仕上げ	Uniform satin-brushed stainless load surface with passivated welds and cobalt-blue corner guards
ジョイントタイプ	Mechanically interlocked formed deck slats welded to three sealed runners with reinforced four-way fork pockets
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

1200 × 1000 mm footprintType 316L constructionPerforated drainage deckConductive corner protectors

Planning a Stainless Steel Cleanroom Pallet specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する