Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Meubles de salle blanche et produits en acier inoxydable
Acier inoxydable Cleanroom Pallet
A formed Type 304 stainless four-way cleanroom pallet with a closed slatted deck, sealed box runners, reinforced fork openings and replaceable blue corner protectors.
- Four-way fork entry
- Closed formed deck slats
- Sealed stainless runners
- Replaceable blue corner guards
Introduction de produit
The stainless steel cleanroom pallet replaces porous timber and corroding painted steel under bulk material loads. Formed Type 304 deck slats interlock into a continuous upper surface with narrow drainage seams rather than open wood-style boards. Three sealed box runners carry the load and provide full-length two-way entry, while reinforced notches through the outer runners create cross-entry for pallet forks. Cobalt-blue replaceable protectors cover the four impact-prone corners without obscuring the stainless deck or fork pockets.
Key Features
Three sealed box runners avoid open hollow sections along the pallet underside.
Reinforced cross-entry notches create four-way fork access without cutting through an unsupported skin.
Blue replaceable corner guards identify impact points and protect door jambs during transfer.
Préoccupations du client produit
A reusable cleanroom pallet must tolerate cleaning, remain closed against debris and accept common fork directions without the pores or coatings associated with conventional pallets.
Timber fibres and damaged fasteners enter the controlled material route.The pallet uses formed stainless deck members and welded runners without wood or exposed nails.
Open tubular ends retain wash water and hide residue.All box runners terminate with continuously welded stainless closure plates.
Two-way pallets force lift trucks to approach from a constrained aisle direction.Reinforced side notches combine with full runner openings to provide four-way entry.
Bare metal corners damage cleanroom doors during repeated handling.Four cobalt-blue replaceable corner guards form controlled non-marking impact points.
Les applications typiques
Pharmaceutical material stagingClean food ingredient logisticsMedical-device bulk component transferControlled warehouse palletizingWashdown cleanroom material handling
Paramètres techniques
Typical configurable specifications for a formed four-way Type 304 cleanroom pallet are listed below.
| Matériaux de base | Formed Type 304 stainless deck slats and sealed runners with cobalt-blue replaceable polyurethane corner guards |
|---|---|
| Panneau épaisseur | 0.8 mm formed deck slats with 1.5 mm reinforcement sections |
| Largeur effective | 1100 mm nominal pallet width |
| Longueur maximale | 1100 mm nominal pallet length |
| Acier face épaisseur | 0.8 mm Type 304 deck skin; 1.5 mm runner and fork-pocket reinforcement |
| Densité Core | 7900–8000 kg/m³ for Type 304 stainless components |
| Conductivité thermique | 14 - 17 W / (m · K) pour les composants inoxydables de type 304 |
| surface finie | Uniform satin-brushed stainless load surface with passivated welds and cobalt-blue corner guards |
| Type joint | Mechanically interlocked formed deck slats welded to three sealed runners with reinforced four-way fork pockets |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
1200 × 1000 mm footprintType 316L constructionPerforated drainage deckConductive corner protectors
Planning a Stainless Steel Cleanroom Pallet specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
