English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Мебель для чистых комнат и изделия из нержавеющей стали
Поддоны из нержавеющей стали для чистых помещений
A formed Type 304 stainless four-way cleanroom pallet with a closed slatted deck, sealed box runners, reinforced fork openings and replaceable blue corner protectors.
- Four-way fork entry
- Closed formed deck slats
- Sealed stainless runners
- Replaceable blue corner guards
Введение продукции
The stainless steel cleanroom pallet replaces porous timber and corroding painted steel under bulk material loads. Formed Type 304 deck slats interlock into a continuous upper surface with narrow drainage seams rather than open wood-style boards. Three sealed box runners carry the load and provide full-length two-way entry, while reinforced notches through the outer runners create cross-entry for pallet forks. Cobalt-blue replaceable protectors cover the four impact-prone corners without obscuring the stainless deck or fork pockets.
Основные характеристики
Three sealed box runners avoid open hollow sections along the pallet underside.
Reinforced cross-entry notches create four-way fork access without cutting through an unsupported skin.
Blue replaceable corner guards identify impact points and protect door jambs during transfer.
Обеспокоенность клиентов продуктами
A reusable cleanroom pallet must tolerate cleaning, remain closed against debris and accept common fork directions without the pores or coatings associated with conventional pallets.
Timber fibres and damaged fasteners enter the controlled material route.The pallet uses formed stainless deck members and welded runners without wood or exposed nails.
Open tubular ends retain wash water and hide residue.All box runners terminate with continuously welded stainless closure plates.
Two-way pallets force lift trucks to approach from a constrained aisle direction.Reinforced side notches combine with full runner openings to provide four-way entry.
Bare metal corners damage cleanroom doors during repeated handling.Four cobalt-blue replaceable corner guards form controlled non-marking impact points.
Типичные приложения
Pharmaceutical material stagingClean food ingredient logisticsMedical-device bulk component transferControlled warehouse palletizingWashdown cleanroom material handling
Технические параметры
Typical configurable specifications for a formed four-way Type 304 cleanroom pallet are listed below.
| Основной материал | Formed Type 304 stainless deck slats and sealed runners with cobalt-blue replaceable polyurethane corner guards |
|---|---|
| Толщина панели | 0.8 mm formed deck slats with 1.5 mm reinforcement sections |
| эффективная ширина | 1100 mm nominal pallet width |
| Максимальная длина | 1100 mm nominal pallet length |
| Толщина линий стали | 0.8 mm Type 304 deck skin; 1.5 mm runner and fork-pocket reinforcement |
| Плотность ядра | 7900–8000 kg/m³ for Type 304 stainless components |
| Теплопроводимость | 14–17 W/(m·K) for Type 304 stainless components |
| Поверхностная отделка | Uniform satin-brushed stainless load surface with passivated welds and cobalt-blue corner guards |
| Объединенный тип | Mechanically interlocked formed deck slats welded to three sealed runners with reinforced four-way fork pockets |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
1200 × 1000 mm footprintType 316L constructionPerforated drainage deckConductive corner protectors
Planning a Stainless Steel Cleanroom Pallet specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
