Four-way stainless cleanroom pallet with closed slatted deck and blue corners

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 클린룸 팔레트

A formed Type 304 stainless four-way cleanroom pallet with a closed slatted deck, sealed box runners, reinforced fork openings and replaceable blue corner protectors.

Four-way fork entry
Closed formed deck slats
Sealed stainless runners
Replaceable blue corner guards

견적 요청 제품 찾아보기

상품 소개

The stainless steel cleanroom pallet replaces porous timber and corroding painted steel under bulk material loads. Formed Type 304 deck slats interlock into a continuous upper surface with narrow drainage seams rather than open wood-style boards. Three sealed box runners carry the load and provide full-length two-way entry, while reinforced notches through the outer runners create cross-entry for pallet forks. Cobalt-blue replaceable protectors cover the four impact-prone corners without obscuring the stainless deck or fork pockets.

주요 기능

Formed stainless deck slats present a closed, wipeable upper load surface.

Three sealed box runners avoid open hollow sections along the pallet underside.

Reinforced cross-entry notches create four-way fork access without cutting through an unsupported skin.

Blue replaceable corner guards identify impact points and protect door jambs during transfer.

고객 제품 관심사

A reusable cleanroom pallet must tolerate cleaning, remain closed against debris and accept common fork directions without the pores or coatings associated with conventional pallets.

Timber fibres and damaged fasteners enter the controlled material route.The pallet uses formed stainless deck members and welded runners without wood or exposed nails.

Open tubular ends retain wash water and hide residue.All box runners terminate with continuously welded stainless closure plates.

Two-way pallets force lift trucks to approach from a constrained aisle direction.Reinforced side notches combine with full runner openings to provide four-way entry.

Bare metal corners damage cleanroom doors during repeated handling.Four cobalt-blue replaceable corner guards form controlled non-marking impact points.

일반적인 응용 프로그램

Pharmaceutical material stagingClean food ingredient logisticsMedical-device bulk component transferControlled warehouse palletizingWashdown cleanroom material handling

기술 매개변수

Typical configurable specifications for a formed four-way Type 304 cleanroom pallet are listed below.

핵심 재료	Formed Type 304 stainless deck slats and sealed runners with cobalt-blue replaceable polyurethane corner guards
패널 두께	0.8 mm formed deck slats with 1.5 mm reinforcement sections
유효 폭	1100 mm nominal pallet width
최대 길이	1100 mm nominal pallet length
강철 면면 두께	0.8 mm Type 304 deck skin; 1.5 mm runner and fork-pocket reinforcement
코어 밀도	7900–8000 kg/m³ for Type 304 stainless components
열전도도 (Thermal Conductivity)	14 - 17 W / (m · K) Type 304 스테인레스 부품
표면 마무리	Uniform satin-brushed stainless load surface with passivated welds and cobalt-blue corner guards
접합 유형	Mechanically interlocked formed deck slats welded to three sealed runners with reinforced four-way fork pockets
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

1200 × 1000 mm footprintType 316L constructionPerforated drainage deckConductive corner protectors

Planning a Stainless Steel Cleanroom Pallet specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.