Four-way stainless cleanroom pallet with closed slatted deck and blue corners

Perabot bilik bersih dan produk keluli tahan karat

Pallet bilik bersih keluli tahan karat

A formed Type 304 stainless four-way cleanroom pallet with a closed slatted deck, sealed box runners, reinforced fork openings and replaceable blue corner protectors.

Four-way fork entry
Closed formed deck slats
Sealed stainless runners
Replaceable blue corner guards

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The stainless steel cleanroom pallet replaces porous timber and corroding painted steel under bulk material loads. Formed Type 304 deck slats interlock into a continuous upper surface with narrow drainage seams rather than open wood-style boards. Three sealed box runners carry the load and provide full-length two-way entry, while reinforced notches through the outer runners create cross-entry for pallet forks. Cobalt-blue replaceable protectors cover the four impact-prone corners without obscuring the stainless deck or fork pockets.

Ciri-ciri Utama

Formed stainless deck slats present a closed, wipeable upper load surface.

Three sealed box runners avoid open hollow sections along the pallet underside.

Reinforced cross-entry notches create four-way fork access without cutting through an unsupported skin.

Blue replaceable corner guards identify impact points and protect door jambs during transfer.

Kebimbangan Produk Pelanggan

A reusable cleanroom pallet must tolerate cleaning, remain closed against debris and accept common fork directions without the pores or coatings associated with conventional pallets.

Timber fibres and damaged fasteners enter the controlled material route.The pallet uses formed stainless deck members and welded runners without wood or exposed nails.

Open tubular ends retain wash water and hide residue.All box runners terminate with continuously welded stainless closure plates.

Two-way pallets force lift trucks to approach from a constrained aisle direction.Reinforced side notches combine with full runner openings to provide four-way entry.

Bare metal corners damage cleanroom doors during repeated handling.Four cobalt-blue replaceable corner guards form controlled non-marking impact points.

Permohonan yang biasa

Pharmaceutical material stagingClean food ingredient logisticsMedical-device bulk component transferControlled warehouse palletizingWashdown cleanroom material handling

Parameter teknikal

Typical configurable specifications for a formed four-way Type 304 cleanroom pallet are listed below.

Bahan Teras	Formed Type 304 stainless deck slats and sealed runners with cobalt-blue replaceable polyurethane corner guards
Ketebalan Panel	0.8 mm formed deck slats with 1.5 mm reinforcement sections
Lebar berkesan	1100 mm nominal pallet width
Panjang maksimum	1100 mm nominal pallet length
Keluli Menghadapi Ketebalan	0.8 mm Type 304 deck skin; 1.5 mm runner and fork-pocket reinforcement
Ketumpatan teras	7900–8000 kg/m³ for Type 304 stainless components
Kekonduksian Terma	14-17 W / (m · K) untuk komponen tahan karat Jenis 304
Kemasan permukaan	Uniform satin-brushed stainless load surface with passivated welds and cobalt-blue corner guards
Jenis Bersatu	Mechanically interlocked formed deck slats welded to three sealed runners with reinforced four-way fork pockets
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

1200 × 1000 mm footprintType 316L constructionPerforated drainage deckConductive corner protectors

Planning a Stainless Steel Cleanroom Pallet specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami