Four-way stainless cleanroom pallet with closed slatted deck and blue corners

Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri

Paslanmaz Çelik Temiz Oda Paletleri

A formed Type 304 stainless four-way cleanroom pallet with a closed slatted deck, sealed box runners, reinforced fork openings and replaceable blue corner protectors.

Four-way fork entry
Closed formed deck slats
Sealed stainless runners
Replaceable blue corner guards

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The stainless steel cleanroom pallet replaces porous timber and corroding painted steel under bulk material loads. Formed Type 304 deck slats interlock into a continuous upper surface with narrow drainage seams rather than open wood-style boards. Three sealed box runners carry the load and provide full-length two-way entry, while reinforced notches through the outer runners create cross-entry for pallet forks. Cobalt-blue replaceable protectors cover the four impact-prone corners without obscuring the stainless deck or fork pockets.

Ana Özellikler

Formed stainless deck slats present a closed, wipeable upper load surface.

Three sealed box runners avoid open hollow sections along the pallet underside.

Reinforced cross-entry notches create four-way fork access without cutting through an unsupported skin.

Blue replaceable corner guards identify impact points and protect door jambs during transfer.

Müşteri Ürün Sorunları

A reusable cleanroom pallet must tolerate cleaning, remain closed against debris and accept common fork directions without the pores or coatings associated with conventional pallets.

Timber fibres and damaged fasteners enter the controlled material route.The pallet uses formed stainless deck members and welded runners without wood or exposed nails.

Open tubular ends retain wash water and hide residue.All box runners terminate with continuously welded stainless closure plates.

Two-way pallets force lift trucks to approach from a constrained aisle direction.Reinforced side notches combine with full runner openings to provide four-way entry.

Bare metal corners damage cleanroom doors during repeated handling.Four cobalt-blue replaceable corner guards form controlled non-marking impact points.

Tipik uygulamalar

Pharmaceutical material stagingClean food ingredient logisticsMedical-device bulk component transferControlled warehouse palletizingWashdown cleanroom material handling

Teknik parametreler

Typical configurable specifications for a formed four-way Type 304 cleanroom pallet are listed below.

Temel malzemeler	Formed Type 304 stainless deck slats and sealed runners with cobalt-blue replaceable polyurethane corner guards
Panel kalınlığı	0.8 mm formed deck slats with 1.5 mm reinforcement sections
Effective Width (Etkili Genişlik)	1100 mm nominal pallet width
Maksimum uzunluk	1100 mm nominal pallet length
Çelik yüz yüze kalınlığı	0.8 mm Type 304 deck skin; 1.5 mm runner and fork-pocket reinforcement
Core Density (Çekirdek Yoğunluğu)	7900–8000 kg/m³ for Type 304 stainless components
Termal İletkenlik	Tip 304 paslanmaz bileşenler için 14-17 W / (m · K)
Yüzey bitirme	Uniform satin-brushed stainless load surface with passivated welds and cobalt-blue corner guards
Ortak tip	Mechanically interlocked formed deck slats welded to three sealed runners with reinforced four-way fork pockets
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

1200 × 1000 mm footprintType 316L constructionPerforated drainage deckConductive corner protectors

Planning a Stainless Steel Cleanroom Pallet specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun