Four-way stainless cleanroom pallet with closed slatted deck and blue corners

Cleanroom Furniture dan Produk Stainless Steel

Stainless Steel Cleanroom Pallet Stainless Steel Cleanroom

A formed Type 304 stainless four-way cleanroom pallet with a closed slatted deck, sealed box runners, reinforced fork openings and replaceable blue corner protectors.

Four-way fork entry
Closed formed deck slats
Sealed stainless runners
Replaceable blue corner guards

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The stainless steel cleanroom pallet replaces porous timber and corroding painted steel under bulk material loads. Formed Type 304 deck slats interlock into a continuous upper surface with narrow drainage seams rather than open wood-style boards. Three sealed box runners carry the load and provide full-length two-way entry, while reinforced notches through the outer runners create cross-entry for pallet forks. Cobalt-blue replaceable protectors cover the four impact-prone corners without obscuring the stainless deck or fork pockets.

Fitur utama:

Formed stainless deck slats present a closed, wipeable upper load surface.

Three sealed box runners avoid open hollow sections along the pallet underside.

Reinforced cross-entry notches create four-way fork access without cutting through an unsupported skin.

Blue replaceable corner guards identify impact points and protect door jambs during transfer.

Kekhawatiran produk pelanggan

A reusable cleanroom pallet must tolerate cleaning, remain closed against debris and accept common fork directions without the pores or coatings associated with conventional pallets.

Timber fibres and damaged fasteners enter the controlled material route.The pallet uses formed stainless deck members and welded runners without wood or exposed nails.

Open tubular ends retain wash water and hide residue.All box runners terminate with continuously welded stainless closure plates.

Two-way pallets force lift trucks to approach from a constrained aisle direction.Reinforced side notches combine with full runner openings to provide four-way entry.

Bare metal corners damage cleanroom doors during repeated handling.Four cobalt-blue replaceable corner guards form controlled non-marking impact points.

Aplikasi yang Tipis

Pharmaceutical material stagingClean food ingredient logisticsMedical-device bulk component transferControlled warehouse palletizingWashdown cleanroom material handling

Parameter teknis

Typical configurable specifications for a formed four-way Type 304 cleanroom pallet are listed below.

Bahan inti	Formed Type 304 stainless deck slats and sealed runners with cobalt-blue replaceable polyurethane corner guards
Ketebalan Panel (Panel Thickness)	0.8 mm formed deck slats with 1.5 mm reinforcement sections
Efektif lebar	1100 mm nominal pallet width
Panjang maksimum	1100 mm nominal pallet length
Baja menghadap ketebalan	0.8 mm Type 304 deck skin; 1.5 mm runner and fork-pocket reinforcement
Kepadatan inti (core density)	7900–8000 kg/m³ for Type 304 stainless components
Konduktivitas Termal (Thermal Conductivity)	14 - 17 W / (m · K) untuk komponen stainless Tipe 304
Permukaan selesai	Uniform satin-brushed stainless load surface with passivated welds and cobalt-blue corner guards
Jenis Bersama	Mechanically interlocked formed deck slats welded to three sealed runners with reinforced four-way fork pockets
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

1200 × 1000 mm footprintType 316L constructionPerforated drainage deckConductive corner protectors

Planning a Stainless Steel Cleanroom Pallet specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami