Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de manuseio de ar e HVAC para sala limpa
Z Umidificador de vapor resistivo
A precision atmospheric steam generator that boils mains or treated water with immersed resistance elements inside a serviceable stainless cylinder.
- Close Steam Modulation
- Stainless Steam Cylinder
- Mains or Treated Water
- Accessible Scale Collector
Introdução do produto
Electric immersion elements heat water in a stainless cylinder independently of water conductivity. This allows close output modulation and operation on potable, softened or demineralized feed water. Minerals settle toward a lower collection tank during blowdown, while the front service opening exposes the cylinder, heater flange and drain components for routine care.
Características-chave
A corrosion-resistant stainless cylinder supports potable or low-mineral water service.
A lower scale collector separates settled minerals from the main boiling zone for easier removal.
Proportional power control supports tighter relative-humidity response than coarse on-off boiling.
Preocupações do produto do cliente
Precision humidification needs repeatable modulation while preventing scale from blocking drains or insulating the heater surface.
Low-conductivity treated water will not operate an electrode cylinder reliably.Immersed resistance elements generate heat without using water as the electrical path.
Scale accumulates around heaters and drain ports.Controlled blowdown and a removable lower collector separate and capture mineral solids.
A small RH deviation affects sensitive production or storage.Proportional element control provides fine steam-output adjustment over a broad range.
Heater inspection requires extensive cabinet disassembly.The front service door and flanged bundle expose the complete cylinder and element assembly.
Aplicações típicas
Precision pharmaceutical cleanroomsResearch and calibration laboratoriesHospital critical-care HVACSemiconductor process roomsMuseum archive humidity control
Parâmetros técnicos
Typical commercial resistive humidifier construction and size ranges are shown below.
| Material principal | Stainless steel steam cylinder with Incoloy-sheathed resistance heater bundle |
|---|---|
| Painel de espessura | 1.0-1.5 mm stainless or powder-coated cabinet panels |
| Largura efetiva | 450-1100 mm cabinet width |
| Comprimento máximo | Up to 406 mm overall cabinet depth |
| Aço enfrentando espessura | 1.0-1.5 mm stainless or coated steel enclosure |
| Densidade Core | Approximately 7900-8000 kg/m³ for stainless steel steam-cylinder material |
| Condutividade térmica | Approximately 14-16 W/(m·K) for stainless steam-cylinder material |
| Superfície acabado | Brushed stainless steel and charcoal powder-coated service panels |
| Tipo conjunto | Bolted cabinet with flanged heater bundle, hose steam outlet and threaded water/drain ports |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Potable, softened or reverse-osmosis feed waterSingle or multiple steam outletsDuct lance or direct-room blower distributionRemote humidity sensors and communications interface
Planning a Resistive Steam Humidifier specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
