İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda HVAC ve Hava İşleme Ekipmanları
Dirençli Steam Humidifier
A precision atmospheric steam generator that boils mains or treated water with immersed resistance elements inside a serviceable stainless cylinder.
- Close Steam Modulation
- Stainless Steam Cylinder
- Mains or Treated Water
- Accessible Scale Collector
Ürün tanıtımı
Electric immersion elements heat water in a stainless cylinder independently of water conductivity. This allows close output modulation and operation on potable, softened or demineralized feed water. Minerals settle toward a lower collection tank during blowdown, while the front service opening exposes the cylinder, heater flange and drain components for routine care.
Ana Özellikler
A corrosion-resistant stainless cylinder supports potable or low-mineral water service.
A lower scale collector separates settled minerals from the main boiling zone for easier removal.
Proportional power control supports tighter relative-humidity response than coarse on-off boiling.
Müşteri Ürün Sorunları
Precision humidification needs repeatable modulation while preventing scale from blocking drains or insulating the heater surface.
Low-conductivity treated water will not operate an electrode cylinder reliably.Immersed resistance elements generate heat without using water as the electrical path.
Scale accumulates around heaters and drain ports.Controlled blowdown and a removable lower collector separate and capture mineral solids.
A small RH deviation affects sensitive production or storage.Proportional element control provides fine steam-output adjustment over a broad range.
Heater inspection requires extensive cabinet disassembly.The front service door and flanged bundle expose the complete cylinder and element assembly.
Tipik uygulamalar
Precision pharmaceutical cleanroomsResearch and calibration laboratoriesHospital critical-care HVACSemiconductor process roomsMuseum archive humidity control
Teknik parametreler
Typical commercial resistive humidifier construction and size ranges are shown below.
| Temel malzemeler | Stainless steel steam cylinder with Incoloy-sheathed resistance heater bundle |
|---|---|
| Panel kalınlığı | 1.0-1.5 mm stainless or powder-coated cabinet panels |
| Effective Width (Etkili Genişlik) | 450-1100 mm cabinet width |
| Maksimum uzunluk | Up to 406 mm overall cabinet depth |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm stainless or coated steel enclosure |
| Core Density (Çekirdek Yoğunluğu) | Approximately 7900-8000 kg/m³ for stainless steel steam-cylinder material |
| Termal İletkenlik | Approximately 14-16 W/(m·K) for stainless steam-cylinder material |
| Yüzey bitirme | Brushed stainless steel and charcoal powder-coated service panels |
| Ortak tip | Bolted cabinet with flanged heater bundle, hose steam outlet and threaded water/drain ports |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Potable, softened or reverse-osmosis feed waterSingle or multiple steam outletsDuct lance or direct-room blower distributionRemote humidity sensors and communications interface
Planning a Resistive Steam Humidifier specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
