Resistive steam humidifier with stainless cylinder and touchscreen

クリーンルーム HVAC および空気処理装置

抵抗蒸気加湿器

A precision atmospheric steam generator that boils mains or treated water with immersed resistance elements inside a serviceable stainless cylinder.

Close Steam Modulation
Stainless Steam Cylinder
Mains or Treated Water
Accessible Scale Collector

見積もりリクエスト製品案内

商品紹介

Electric immersion elements heat water in a stainless cylinder independently of water conductivity. This allows close output modulation and operation on potable, softened or demineralized feed water. Minerals settle toward a lower collection tank during blowdown, while the front service opening exposes the cylinder, heater flange and drain components for routine care.

主要な特徴

Dedicated resistance elements make steam output largely independent of feed-water conductivity.

A corrosion-resistant stainless cylinder supports potable or low-mineral water service.

A lower scale collector separates settled minerals from the main boiling zone for easier removal.

Proportional power control supports tighter relative-humidity response than coarse on-off boiling.

お客様の製品に関する懸念事項

Precision humidification needs repeatable modulation while preventing scale from blocking drains or insulating the heater surface.

Low-conductivity treated water will not operate an electrode cylinder reliably.Immersed resistance elements generate heat without using water as the electrical path.

Scale accumulates around heaters and drain ports.Controlled blowdown and a removable lower collector separate and capture mineral solids.

A small RH deviation affects sensitive production or storage.Proportional element control provides fine steam-output adjustment over a broad range.

Heater inspection requires extensive cabinet disassembly.The front service door and flanged bundle expose the complete cylinder and element assembly.

典型的な用途

Precision pharmaceutical cleanroomsResearch and calibration laboratoriesHospital critical-care HVACSemiconductor process roomsMuseum archive humidity control

技術的なパラメータ

Typical commercial resistive humidifier construction and size ranges are shown below.

コア材料	Stainless steel steam cylinder with Incoloy-sheathed resistance heater bundle
パネルの厚さ	1.0-1.5 mm stainless or powder-coated cabinet panels
有効幅	450-1100 mm cabinet width
最大長さ	Up to 406 mm overall cabinet depth
鋼鉄の厚さを直面する	1.0-1.5 mm stainless or coated steel enclosure
コア密度	Approximately 7900-8000 kg/m³ for stainless steel steam-cylinder material
熱伝導率	Approximately 14-16 W/(m·K) for stainless steam-cylinder material
表面仕上げ	Brushed stainless steel and charcoal powder-coated service panels
ジョイントタイプ	Bolted cabinet with flanged heater bundle, hose steam outlet and threaded water/drain ports
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Potable, softened or reverse-osmosis feed waterSingle or multiple steam outletsDuct lance or direct-room blower distributionRemote humidity sensors and communications interface

Planning a Resistive Steam Humidifier specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する