Resistive steam humidifier with stainless cylinder and touchscreen

클린룸 HVAC 및 공기 처리 장비

저항 증기 가습기

A precision atmospheric steam generator that boils mains or treated water with immersed resistance elements inside a serviceable stainless cylinder.

Close Steam Modulation
Stainless Steam Cylinder
Mains or Treated Water
Accessible Scale Collector

견적 요청 제품 찾아보기

상품 소개

Electric immersion elements heat water in a stainless cylinder independently of water conductivity. This allows close output modulation and operation on potable, softened or demineralized feed water. Minerals settle toward a lower collection tank during blowdown, while the front service opening exposes the cylinder, heater flange and drain components for routine care.

주요 기능

Dedicated resistance elements make steam output largely independent of feed-water conductivity.

A corrosion-resistant stainless cylinder supports potable or low-mineral water service.

A lower scale collector separates settled minerals from the main boiling zone for easier removal.

Proportional power control supports tighter relative-humidity response than coarse on-off boiling.

고객 제품 관심사

Precision humidification needs repeatable modulation while preventing scale from blocking drains or insulating the heater surface.

Low-conductivity treated water will not operate an electrode cylinder reliably.Immersed resistance elements generate heat without using water as the electrical path.

Scale accumulates around heaters and drain ports.Controlled blowdown and a removable lower collector separate and capture mineral solids.

A small RH deviation affects sensitive production or storage.Proportional element control provides fine steam-output adjustment over a broad range.

Heater inspection requires extensive cabinet disassembly.The front service door and flanged bundle expose the complete cylinder and element assembly.

일반적인 응용 프로그램

Precision pharmaceutical cleanroomsResearch and calibration laboratoriesHospital critical-care HVACSemiconductor process roomsMuseum archive humidity control

기술 매개변수

Typical commercial resistive humidifier construction and size ranges are shown below.

핵심 재료	Stainless steel steam cylinder with Incoloy-sheathed resistance heater bundle
패널 두께	1.0-1.5 mm stainless or powder-coated cabinet panels
유효 폭	450-1100 mm cabinet width
최대 길이	Up to 406 mm overall cabinet depth
강철 면면 두께	1.0-1.5 mm stainless or coated steel enclosure
코어 밀도	Approximately 7900-8000 kg/m³ for stainless steel steam-cylinder material
열전도도 (Thermal Conductivity)	Approximately 14-16 W/(m·K) for stainless steam-cylinder material
표면 마무리	Brushed stainless steel and charcoal powder-coated service panels
접합 유형	Bolted cabinet with flanged heater bundle, hose steam outlet and threaded water/drain ports
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Potable, softened or reverse-osmosis feed waterSingle or multiple steam outletsDuct lance or direct-room blower distributionRemote humidity sensors and communications interface

Planning a Resistive Steam Humidifier specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.