English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
ОВК и оборудование для обработки воздуха в чистых помещениях
Увлажнитель парового сопротивления
A precision atmospheric steam generator that boils mains or treated water with immersed resistance elements inside a serviceable stainless cylinder.
- Close Steam Modulation
- Stainless Steam Cylinder
- Mains or Treated Water
- Accessible Scale Collector
Введение продукции
Electric immersion elements heat water in a stainless cylinder independently of water conductivity. This allows close output modulation and operation on potable, softened or demineralized feed water. Minerals settle toward a lower collection tank during blowdown, while the front service opening exposes the cylinder, heater flange and drain components for routine care.
Основные характеристики
A corrosion-resistant stainless cylinder supports potable or low-mineral water service.
A lower scale collector separates settled minerals from the main boiling zone for easier removal.
Proportional power control supports tighter relative-humidity response than coarse on-off boiling.
Обеспокоенность клиентов продуктами
Precision humidification needs repeatable modulation while preventing scale from blocking drains or insulating the heater surface.
Low-conductivity treated water will not operate an electrode cylinder reliably.Immersed resistance elements generate heat without using water as the electrical path.
Scale accumulates around heaters and drain ports.Controlled blowdown and a removable lower collector separate and capture mineral solids.
A small RH deviation affects sensitive production or storage.Proportional element control provides fine steam-output adjustment over a broad range.
Heater inspection requires extensive cabinet disassembly.The front service door and flanged bundle expose the complete cylinder and element assembly.
Типичные приложения
Precision pharmaceutical cleanroomsResearch and calibration laboratoriesHospital critical-care HVACSemiconductor process roomsMuseum archive humidity control
Технические параметры
Typical commercial resistive humidifier construction and size ranges are shown below.
| Основной материал | Stainless steel steam cylinder with Incoloy-sheathed resistance heater bundle |
|---|---|
| Толщина панели | 1.0-1.5 mm stainless or powder-coated cabinet panels |
| эффективная ширина | 450-1100 mm cabinet width |
| Максимальная длина | Up to 406 mm overall cabinet depth |
| Толщина линий стали | 1.0-1.5 mm stainless or coated steel enclosure |
| Плотность ядра | Approximately 7900-8000 kg/m³ for stainless steel steam-cylinder material |
| Теплопроводимость | Approximately 14-16 W/(m·K) for stainless steam-cylinder material |
| Поверхностная отделка | Brushed stainless steel and charcoal powder-coated service panels |
| Объединенный тип | Bolted cabinet with flanged heater bundle, hose steam outlet and threaded water/drain ports |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Potable, softened or reverse-osmosis feed waterSingle or multiple steam outletsDuct lance or direct-room blower distributionRemote humidity sensors and communications interface
Planning a Resistive Steam Humidifier specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
