Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Salle blanche HVAC et équipement de manutention de l'air
Humidificateur à vapeur résistif
A precision atmospheric steam generator that boils mains or treated water with immersed resistance elements inside a serviceable stainless cylinder.
- Close Steam Modulation
- Stainless Steam Cylinder
- Mains or Treated Water
- Accessible Scale Collector
Introduction de produit
Electric immersion elements heat water in a stainless cylinder independently of water conductivity. This allows close output modulation and operation on potable, softened or demineralized feed water. Minerals settle toward a lower collection tank during blowdown, while the front service opening exposes the cylinder, heater flange and drain components for routine care.
Key Features
A corrosion-resistant stainless cylinder supports potable or low-mineral water service.
A lower scale collector separates settled minerals from the main boiling zone for easier removal.
Proportional power control supports tighter relative-humidity response than coarse on-off boiling.
Préoccupations du client produit
Precision humidification needs repeatable modulation while preventing scale from blocking drains or insulating the heater surface.
Low-conductivity treated water will not operate an electrode cylinder reliably.Immersed resistance elements generate heat without using water as the electrical path.
Scale accumulates around heaters and drain ports.Controlled blowdown and a removable lower collector separate and capture mineral solids.
A small RH deviation affects sensitive production or storage.Proportional element control provides fine steam-output adjustment over a broad range.
Heater inspection requires extensive cabinet disassembly.The front service door and flanged bundle expose the complete cylinder and element assembly.
Les applications typiques
Precision pharmaceutical cleanroomsResearch and calibration laboratoriesHospital critical-care HVACSemiconductor process roomsMuseum archive humidity control
Paramètres techniques
Typical commercial resistive humidifier construction and size ranges are shown below.
| Matériaux de base | Stainless steel steam cylinder with Incoloy-sheathed resistance heater bundle |
|---|---|
| Panneau épaisseur | 1.0-1.5 mm stainless or powder-coated cabinet panels |
| Largeur effective | 450-1100 mm cabinet width |
| Longueur maximale | Up to 406 mm overall cabinet depth |
| Acier face épaisseur | 1.0-1.5 mm stainless or coated steel enclosure |
| Densité Core | Approximately 7900-8000 kg/m³ for stainless steel steam-cylinder material |
| Conductivité thermique | Approximately 14-16 W/(m·K) for stainless steam-cylinder material |
| surface finie | Brushed stainless steel and charcoal powder-coated service panels |
| Type joint | Bolted cabinet with flanged heater bundle, hose steam outlet and threaded water/drain ports |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Potable, softened or reverse-osmosis feed waterSingle or multiple steam outletsDuct lance or direct-room blower distributionRemote humidity sensors and communications interface
Planning a Resistive Steam Humidifier specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
