Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Reinraum HVAC und Luftbehandlung Ausrüstung
Widerstandsfähiger Steam Humidifier
A precision atmospheric steam generator that boils mains or treated water with immersed resistance elements inside a serviceable stainless cylinder.
- Close Steam Modulation
- Stainless Steam Cylinder
- Mains or Treated Water
- Accessible Scale Collector
Produkteinführung
Electric immersion elements heat water in a stainless cylinder independently of water conductivity. This allows close output modulation and operation on potable, softened or demineralized feed water. Minerals settle toward a lower collection tank during blowdown, while the front service opening exposes the cylinder, heater flange and drain components for routine care.
Key Features
A corrosion-resistant stainless cylinder supports potable or low-mineral water service.
A lower scale collector separates settled minerals from the main boiling zone for easier removal.
Proportional power control supports tighter relative-humidity response than coarse on-off boiling.
Kunden Produktbedenken
Precision humidification needs repeatable modulation while preventing scale from blocking drains or insulating the heater surface.
Low-conductivity treated water will not operate an electrode cylinder reliably.Immersed resistance elements generate heat without using water as the electrical path.
Scale accumulates around heaters and drain ports.Controlled blowdown and a removable lower collector separate and capture mineral solids.
A small RH deviation affects sensitive production or storage.Proportional element control provides fine steam-output adjustment over a broad range.
Heater inspection requires extensive cabinet disassembly.The front service door and flanged bundle expose the complete cylinder and element assembly.
Typische Anwendungen
Precision pharmaceutical cleanroomsResearch and calibration laboratoriesHospital critical-care HVACSemiconductor process roomsMuseum archive humidity control
Technische Parameter
Typical commercial resistive humidifier construction and size ranges are shown below.
| Core Material | Stainless steel steam cylinder with Incoloy-sheathed resistance heater bundle |
|---|---|
| Panel Dicke | 1.0-1.5 mm stainless or powder-coated cabinet panels |
| Effektive Breite | 450-1100 mm cabinet width |
| Maximale Länge | Up to 406 mm overall cabinet depth |
| Stahl facing Dicke | 1.0-1.5 mm stainless or coated steel enclosure |
| Kerndichte | Approximately 7900-8000 kg/m³ for stainless steel steam-cylinder material |
| Thermische Leitfähigkeit | Approximately 14-16 W/(m·K) for stainless steam-cylinder material |
| Oberfläche Finish | Brushed stainless steel and charcoal powder-coated service panels |
| Gemeinsamer Typ | Bolted cabinet with flanged heater bundle, hose steam outlet and threaded water/drain ports |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Potable, softened or reverse-osmosis feed waterSingle or multiple steam outletsDuct lance or direct-room blower distributionRemote humidity sensors and communications interface
Planning a Resistive Steam Humidifier specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
