Resistive steam humidifier with stainless cylinder and touchscreen

Cleanroom HVAC dan Peralatan Penanganan Udara

Resistif Steam Humidifier Resistif Steam Humidifier

A precision atmospheric steam generator that boils mains or treated water with immersed resistance elements inside a serviceable stainless cylinder.

Close Steam Modulation
Stainless Steam Cylinder
Mains or Treated Water
Accessible Scale Collector

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Electric immersion elements heat water in a stainless cylinder independently of water conductivity. This allows close output modulation and operation on potable, softened or demineralized feed water. Minerals settle toward a lower collection tank during blowdown, while the front service opening exposes the cylinder, heater flange and drain components for routine care.

Fitur utama:

Dedicated resistance elements make steam output largely independent of feed-water conductivity.

A corrosion-resistant stainless cylinder supports potable or low-mineral water service.

A lower scale collector separates settled minerals from the main boiling zone for easier removal.

Proportional power control supports tighter relative-humidity response than coarse on-off boiling.

Kekhawatiran produk pelanggan

Precision humidification needs repeatable modulation while preventing scale from blocking drains or insulating the heater surface.

Low-conductivity treated water will not operate an electrode cylinder reliably.Immersed resistance elements generate heat without using water as the electrical path.

Scale accumulates around heaters and drain ports.Controlled blowdown and a removable lower collector separate and capture mineral solids.

A small RH deviation affects sensitive production or storage.Proportional element control provides fine steam-output adjustment over a broad range.

Heater inspection requires extensive cabinet disassembly.The front service door and flanged bundle expose the complete cylinder and element assembly.

Aplikasi yang Tipis

Precision pharmaceutical cleanroomsResearch and calibration laboratoriesHospital critical-care HVACSemiconductor process roomsMuseum archive humidity control

Parameter teknis

Typical commercial resistive humidifier construction and size ranges are shown below.

Bahan inti	Stainless steel steam cylinder with Incoloy-sheathed resistance heater bundle
Ketebalan Panel (Panel Thickness)	1.0-1.5 mm stainless or powder-coated cabinet panels
Efektif lebar	450-1100 mm cabinet width
Panjang maksimum	Up to 406 mm overall cabinet depth
Baja menghadap ketebalan	1.0-1.5 mm stainless or coated steel enclosure
Kepadatan inti (core density)	Approximately 7900-8000 kg/m³ for stainless steel steam-cylinder material
Konduktivitas Termal (Thermal Conductivity)	Approximately 14-16 W/(m·K) for stainless steam-cylinder material
Permukaan selesai	Brushed stainless steel and charcoal powder-coated service panels
Jenis Bersama	Bolted cabinet with flanged heater bundle, hose steam outlet and threaded water/drain ports
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Potable, softened or reverse-osmosis feed waterSingle or multiple steam outletsDuct lance or direct-room blower distributionRemote humidity sensors and communications interface

Planning a Resistive Steam Humidifier specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami