Negative-pressure powder dispensing isolator with integrated balance

Fluxo laminar e equipamentos de contenção

Z Isolador de dispensação de pó

A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.

Closed Powder Dispensing
Isolated Balance Support
Negative-Pressure Chamber
Contained Material and Waste Ports

Solicite um orçamento. Browse produtos

Introdução do produto

This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.

Características-chave

A closed glovebox removes the open-front boundary from powder subdivision.

An isolated internal balance slab protects weighing stability.

Dedicated inlet and outlet interfaces separate source and receiving containers.

Negative pressure directs leakage inward toward staged filters.

A continuous liner or bag-out port contains empty packaging and cleaning waste.

Preocupações do produto do cliente

Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.

Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.

Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.

Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.

Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.

Aplicações típicas

Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation

Parâmetros técnicos

Typical configurable construction ranges for a powder dispensing isolator are listed below.

Material principal	Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support
Painel de espessura	50-100 mm double-skin chamber and filter sections
Largura efetiva	1200-3000 mm usable dispensing width
Comprimento máximo	Up to 4500 mm overall isolator length
Aço enfrentando espessura	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
Densidade Core	Approximately 8000 kg/m³ for SUS316L chamber material
Condutividade térmica	14-16 W/(m·K) for austenitic stainless steel
Superfície acabado	Electropolished SUS316L with radiused corners and removable balance surround
Tipo conjunto	Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports
Customização	Disponível com base na aplicação pretendida e no ambiente operacional.

Opções disponíveis

Continuous liner or split valveIntegrated drum or bag inletSafe-change filtersWash-in-place spray devices

Planning a Powder Dispensing Isolator specification?

Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.

Fale com a nossa equipe