İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Powder Dispensing Isolatör
A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.
- Closed Powder Dispensing
- Isolated Balance Support
- Negative-Pressure Chamber
- Contained Material and Waste Ports
Ürün tanıtımı
This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.
Ana Özellikler
An isolated internal balance slab protects weighing stability.
Dedicated inlet and outlet interfaces separate source and receiving containers.
Negative pressure directs leakage inward toward staged filters.
A continuous liner or bag-out port contains empty packaging and cleaning waste.
Müşteri Ürün Sorunları
Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.
Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.
Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.
Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.
Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.
Tipik uygulamalar
Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation
Teknik parametreler
Typical configurable construction ranges for a powder dispensing isolator are listed below.
| Temel malzemeler | Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support |
|---|---|
| Panel kalınlığı | 50-100 mm double-skin chamber and filter sections |
| Effective Width (Etkili Genişlik) | 1200-3000 mm usable dispensing width |
| Maksimum uzunluk | Up to 4500 mm overall isolator length |
| Çelik yüz yüze kalınlığı | 2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins |
| Core Density (Çekirdek Yoğunluğu) | Approximately 8000 kg/m³ for SUS316L chamber material |
| Termal İletkenlik | 14-16 W/(m·K) for austenitic stainless steel |
| Yüzey bitirme | Electropolished SUS316L with radiused corners and removable balance surround |
| Ortak tip | Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Continuous liner or split valveIntegrated drum or bag inletSafe-change filtersWash-in-place spray devices
Planning a Powder Dispensing Isolator specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
