Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Aislador de dispensación de polvo
A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.
- Closed Powder Dispensing
- Isolated Balance Support
- Negative-Pressure Chamber
- Contained Material and Waste Ports
Introducción del producto
This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.
Características clave
An isolated internal balance slab protects weighing stability.
Dedicated inlet and outlet interfaces separate source and receiving containers.
Negative pressure directs leakage inward toward staged filters.
A continuous liner or bag-out port contains empty packaging and cleaning waste.
Preocupaciones del producto del cliente
Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.
Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.
Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.
Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.
Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.
Aplicaciones típicas
Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation
Parámetros técnicos
Typical configurable construction ranges for a powder dispensing isolator are listed below.
| Materiales Core | Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support |
|---|---|
| Panel de espesor | 50-100 mm double-skin chamber and filter sections |
| Ancho efectivo | 1200-3000 mm usable dispensing width |
| Longitud máxima | Up to 4500 mm overall isolator length |
| Acero frente a espesor | 2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins |
| Densidad Core | Approximately 8000 kg/m³ for SUS316L chamber material |
| Conductividad térmica | 14-16 W/(m·K) for austenitic stainless steel |
| Superficie acabada | Electropolished SUS316L with radiused corners and removable balance surround |
| Tipo conjunto | Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Continuous liner or split valveIntegrated drum or bag inletSafe-change filtersWash-in-place spray devices
Planning a Powder Dispensing Isolator specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
