Negative-pressure powder dispensing isolator with integrated balance

Оборудование для ламинарного потока и ограничения

Изолятор для распределения порошка

A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.

Closed Powder Dispensing
Isolated Balance Support
Negative-Pressure Chamber
Contained Material and Waste Ports

Запрос котировки Просмотреть продукты

Введение продукции

This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.

Основные характеристики

A closed glovebox removes the open-front boundary from powder subdivision.

An isolated internal balance slab protects weighing stability.

Dedicated inlet and outlet interfaces separate source and receiving containers.

Negative pressure directs leakage inward toward staged filters.

A continuous liner or bag-out port contains empty packaging and cleaning waste.

Обеспокоенность клиентов продуктами

Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.

Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.

Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.

Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.

Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.

Типичные приложения

Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation

Технические параметры

Typical configurable construction ranges for a powder dispensing isolator are listed below.

Основной материал	Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support
Толщина панели	50-100 mm double-skin chamber and filter sections
эффективная ширина	1200-3000 mm usable dispensing width
Максимальная длина	Up to 4500 mm overall isolator length
Толщина линий стали	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
Плотность ядра	Approximately 8000 kg/m³ for SUS316L chamber material
Теплопроводимость	14-16 W/(m·K) for austenitic stainless steel
Поверхностная отделка	Electropolished SUS316L with radiused corners and removable balance surround
Объединенный тип	Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Continuous liner or split valveIntegrated drum or bag inletSafe-change filtersWash-in-place spray devices

Planning a Powder Dispensing Isolator specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой