Negative-pressure powder dispensing isolator with integrated balance

Aliran Laminar dan Peralatan Penahanan

Bubuk Dispensing Isolator Bubuk Dispensing Isolator

A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.

Closed Powder Dispensing
Isolated Balance Support
Negative-Pressure Chamber
Contained Material and Waste Ports

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.

Fitur utama:

A closed glovebox removes the open-front boundary from powder subdivision.

An isolated internal balance slab protects weighing stability.

Dedicated inlet and outlet interfaces separate source and receiving containers.

Negative pressure directs leakage inward toward staged filters.

A continuous liner or bag-out port contains empty packaging and cleaning waste.

Kekhawatiran produk pelanggan

Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.

Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.

Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.

Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.

Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.

Aplikasi yang Tipis

Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation

Parameter teknis

Typical configurable construction ranges for a powder dispensing isolator are listed below.

Bahan inti	Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support
Ketebalan Panel (Panel Thickness)	50-100 mm double-skin chamber and filter sections
Efektif lebar	1200-3000 mm usable dispensing width
Panjang maksimum	Up to 4500 mm overall isolator length
Baja menghadap ketebalan	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
Kepadatan inti (core density)	Approximately 8000 kg/m³ for SUS316L chamber material
Konduktivitas Termal (Thermal Conductivity)	14 - 16 W / (m · K) untuk baja tahan karat austenitic
Permukaan selesai	Electropolished SUS316L with radiused corners and removable balance surround
Jenis Bersama	Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Continuous liner or split valveIntegrated drum or bag inletPerubahan filter yang amanWash-in-place spray devices

Planning a Powder Dispensing Isolator specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami