Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Laminar Flow und Containment Equipment
Pulver-Distribution Isolator
A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.
- Closed Powder Dispensing
- Isolated Balance Support
- Negative-Pressure Chamber
- Contained Material and Waste Ports
Produkteinführung
This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.
Key Features
An isolated internal balance slab protects weighing stability.
Dedicated inlet and outlet interfaces separate source and receiving containers.
Negative pressure directs leakage inward toward staged filters.
A continuous liner or bag-out port contains empty packaging and cleaning waste.
Kunden Produktbedenken
Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.
Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.
Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.
Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.
Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.
Typische Anwendungen
Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation
Technische Parameter
Typical configurable construction ranges for a powder dispensing isolator are listed below.
| Core Material | Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support |
|---|---|
| Panel Dicke | 50-100 mm double-skin chamber and filter sections |
| Effektive Breite | 1200-3000 mm usable dispensing width |
| Maximale Länge | Up to 4500 mm overall isolator length |
| Stahl facing Dicke | 2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins |
| Kerndichte | Approximately 8000 kg/m³ for SUS316L chamber material |
| Thermische Leitfähigkeit | 14 - 16 W / (m · K) für austenitischen Edelstahl |
| Oberfläche Finish | Electropolished SUS316L with radiused corners and removable balance surround |
| Gemeinsamer Typ | Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Continuous liner or split valveIntegrated drum or bag inletSafe-change filtersWash-in-place spray devices
Planning a Powder Dispensing Isolator specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
