Negative-pressure powder dispensing isolator with integrated balance

層流 · 封じ込め装置

粉の分配のアイソレータ

A negative-pressure glovebox configured for closed powder weighing, subdivision and transfer with an isolated balance and contained waste route.

Closed Powder Dispensing
Isolated Balance Support
Negative-Pressure Chamber
Contained Material and Waste Ports

見積もりリクエスト製品案内

商品紹介

This isolator encloses powder dispensing inside a welded stainless chamber. Operators work through glove ports, material enters through a transfer airlock or bag interface, and measured powder leaves through a sealed receiving connection. The balance sits on a structurally independent support to reduce blower and floor vibration. Negative chamber pressure and staged filtration keep airborne powder within the system, while empty packaging exits through a separate contained route.

主要な特徴

A closed glovebox removes the open-front boundary from powder subdivision.

An isolated internal balance slab protects weighing stability.

Dedicated inlet and outlet interfaces separate source and receiving containers.

Negative pressure directs leakage inward toward staged filters.

A continuous liner or bag-out port contains empty packaging and cleaning waste.

お客様の製品に関する懸念事項

Closed dispensing must preserve accurate weighing while routing source material, product and waste through different contained interfaces.

Fan vibration causes unstable balance readings.An independent balance support passes through the isolator base without sharing the fan frame.

Source and receiving containers cross inside a small chamber.Separate inlet, dispensing and outlet positions create a one-way material sequence.

Empty liners carry residue into the room.A dedicated continuous-liner or bag-out port encloses packaging waste.

Powder remains at sharp internal joints.Welded radiused stainless transitions keep cleaning surfaces accessible.

典型的な用途

Potent powder dispensingAPI subdivisionContained sample weighingPre-weighed batch preparation

技術的なパラメータ

Typical configurable construction ranges for a powder dispensing isolator are listed below.

コア材料	Fully welded SUS316L negative-pressure chamber with safety glass, CSM gloves and an isolated balance support
パネルの厚さ	50-100 mm double-skin chamber and filter sections
有効幅	1200-3000 mm usable dispensing width
最大長さ	Up to 4500 mm overall isolator length
鋼鉄の厚さを直面する	2.0-3.0 mm SUS316L chamber shell; 1.2-1.5 mm service skins
コア密度	Approximately 8000 kg/m³ for SUS316L chamber material
熱伝導率	14-16 W/(m·K) for austenitic stainless steel
表面仕上げ	Electropolished SUS316L with radiused corners and removable balance surround
ジョイントタイプ	Pressure-tight welded chamber with sealed glove rings, isolated balance penetration and contained transfer ports
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Continuous liner or split valveIntegrated drum or bag inletSafe-change filtersWash-in-place spray devices

Planning a Powder Dispensing Isolator specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する