Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Equipamento de sala limpa específico da indústria
Tabela de isolamento de vibração óptica
A damped steel-honeycomb optical table supported by pneumatic isolators to provide a stable precision platform for photonics, microscopy and metrology systems.
- Damped Honeycomb Core
- Precision Mounting Grid
- Pneumatic Isolation
- Self-Leveling Support
Introdução do produto
The optical vibration isolation table combines a rigid steel honeycomb top with a precision stainless mounting surface and pneumatic supports. Internal constrained-layer damping limits structural resonance, while isolator legs reduce floor-borne vibration before it reaches sensitive optical assemblies. A sealed threaded-hole grid, rigid support frame and adjustable leveling hardware provide a practical foundation for clean laboratory and controlled manufacturing environments.
Características-chave
Precision threaded-hole grid supports repeatable instrument positioning across the working surface.
Pneumatic isolators attenuate common vertical and horizontal floor vibration.
Mechanical leveling feet and optional automatic valves maintain stable working height.
Preocupações do produto do cliente
Sensitive optical systems lose alignment and measurement repeatability when floor motion or tabletop resonance reaches the instrument path.
Building vibration introduces motion into high-magnification measurements.Pneumatic isolators attenuate floor-borne vibration before it reaches the tabletop.
A lightly damped surface rings after equipment adjustments.Honeycomb construction and constrained damping reduce structural response across relevant frequencies.
Inaccurate mounting patterns complicate optical alignment.A precision M6 grid provides consistent reference spacing for fixtures and stages.
Uneven floors cause tilt and isolator load imbalance.Independent leveling feet and optional self-leveling valves balance the installed system.
Aplicações típicas
Laser and photonics experimentsPrecision microscopy and imagingSemiconductor metrologyInterferometry and optical alignment
Parâmetros técnicos
Typical construction values for a cleanroom-compatible optical vibration isolation table are listed below.
| Material principal | Vertically bonded closed-cell steel honeycomb with constrained damping layers |
|---|---|
| Painel de espessura | 100-460 mm tabletop thickness |
| Largura efetiva | 900-1800 mm working width |
| Comprimento máximo | Up to 4800 mm tabletop length |
| Aço enfrentando espessura | 4.8 mm ferromagnetic stainless steel working surface |
| Densidade Core | 180-320 kg/m³ effective steel honeycomb core density |
| Condutividade térmica | 14-17 W/(m·K) for stainless working surface |
| Superfície acabado | Matte precision-ground stainless steel top with sealed threaded mounting holes |
| Tipo conjunto | Bonded honeycomb sandwich top mounted on pneumatic isolators with bolted frame braces and adjustable leveling feet |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
M6 or 1/4-20 mounting gridPassive or self-leveling pneumatic isolatorsTuned or active damping modulesCustom tabletop dimensions and cleanroom finishes
Planning a Optical Vibration Isolation Table specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
