Optical vibration isolation table complete three-quarter view with pneumatic supports

Endüstriye Özel Temiz Oda Ekipmanları

Optik titreşim izolasyon tablosu

A damped steel-honeycomb optical table supported by pneumatic isolators to provide a stable precision platform for photonics, microscopy and metrology systems.

Damped Honeycomb Core
Precision Mounting Grid
Pneumatic Isolation
Self-Leveling Support

Alıntı isteği Browse ürünleri

Ürün tanıtımı

The optical vibration isolation table combines a rigid steel honeycomb top with a precision stainless mounting surface and pneumatic supports. Internal constrained-layer damping limits structural resonance, while isolator legs reduce floor-borne vibration before it reaches sensitive optical assemblies. A sealed threaded-hole grid, rigid support frame and adjustable leveling hardware provide a practical foundation for clean laboratory and controlled manufacturing environments.

Ana Özellikler

Vertically bonded steel honeycomb increases stiffness while controlling tabletop mass.

Precision threaded-hole grid supports repeatable instrument positioning across the working surface.

Pneumatic isolators attenuate common vertical and horizontal floor vibration.

Mechanical leveling feet and optional automatic valves maintain stable working height.

Müşteri Ürün Sorunları

Sensitive optical systems lose alignment and measurement repeatability when floor motion or tabletop resonance reaches the instrument path.

Building vibration introduces motion into high-magnification measurements.Pneumatic isolators attenuate floor-borne vibration before it reaches the tabletop.

A lightly damped surface rings after equipment adjustments.Honeycomb construction and constrained damping reduce structural response across relevant frequencies.

Inaccurate mounting patterns complicate optical alignment.A precision M6 grid provides consistent reference spacing for fixtures and stages.

Uneven floors cause tilt and isolator load imbalance.Independent leveling feet and optional self-leveling valves balance the installed system.

Tipik uygulamalar

Laser and photonics experimentsPrecision microscopy and imagingSemiconductor metrologyInterferometry and optical alignment

Teknik parametreler

Typical construction values for a cleanroom-compatible optical vibration isolation table are listed below.

Temel malzemeler	Vertically bonded closed-cell steel honeycomb with constrained damping layers
Panel kalınlığı	100-460 mm tabletop thickness
Effective Width (Etkili Genişlik)	900-1800 mm working width
Maksimum uzunluk	Up to 4800 mm tabletop length
Çelik yüz yüze kalınlığı	4.8 mm ferromagnetic stainless steel working surface
Core Density (Çekirdek Yoğunluğu)	180-320 kg/m³ effective steel honeycomb core density
Termal İletkenlik	14-17 W/(m·K) for stainless working surface
Yüzey bitirme	Matte precision-ground stainless steel top with sealed threaded mounting holes
Ortak tip	Bonded honeycomb sandwich top mounted on pneumatic isolators with bolted frame braces and adjustable leveling feet
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

M6 or 1/4-20 mounting gridPassive or self-leveling pneumatic isolatorsTuned or active damping modulesCustom tabletop dimensions and cleanroom finishes

Planning a Optical Vibration Isolation Table specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun