Optical vibration isolation table complete three-quarter view with pneumatic supports

業界特有のクリーンルーム機器

O 光学振動絶縁テーブル

A damped steel-honeycomb optical table supported by pneumatic isolators to provide a stable precision platform for photonics, microscopy and metrology systems.

Damped Honeycomb Core
Precision Mounting Grid
Pneumatic Isolation
Self-Leveling Support

見積もりリクエスト製品案内

商品紹介

The optical vibration isolation table combines a rigid steel honeycomb top with a precision stainless mounting surface and pneumatic supports. Internal constrained-layer damping limits structural resonance, while isolator legs reduce floor-borne vibration before it reaches sensitive optical assemblies. A sealed threaded-hole grid, rigid support frame and adjustable leveling hardware provide a practical foundation for clean laboratory and controlled manufacturing environments.

主要な特徴

Vertically bonded steel honeycomb increases stiffness while controlling tabletop mass.

Precision threaded-hole grid supports repeatable instrument positioning across the working surface.

Pneumatic isolators attenuate common vertical and horizontal floor vibration.

Mechanical leveling feet and optional automatic valves maintain stable working height.

お客様の製品に関する懸念事項

Sensitive optical systems lose alignment and measurement repeatability when floor motion or tabletop resonance reaches the instrument path.

Building vibration introduces motion into high-magnification measurements.Pneumatic isolators attenuate floor-borne vibration before it reaches the tabletop.

A lightly damped surface rings after equipment adjustments.Honeycomb construction and constrained damping reduce structural response across relevant frequencies.

Inaccurate mounting patterns complicate optical alignment.A precision M6 grid provides consistent reference spacing for fixtures and stages.

Uneven floors cause tilt and isolator load imbalance.Independent leveling feet and optional self-leveling valves balance the installed system.

典型的な用途

Laser and photonics experimentsPrecision microscopy and imagingSemiconductor metrologyInterferometry and optical alignment

技術的なパラメータ

Typical construction values for a cleanroom-compatible optical vibration isolation table are listed below.

コア材料	Vertically bonded closed-cell steel honeycomb with constrained damping layers
パネルの厚さ	100-460 mm tabletop thickness
有効幅	900-1800 mm working width
最大長さ	Up to 4800 mm tabletop length
鋼鉄の厚さを直面する	4.8 mm ferromagnetic stainless steel working surface
コア密度	180-320 kg/m³ effective steel honeycomb core density
熱伝導率	14-17 W/(m·K) for stainless working surface
表面仕上げ	Matte precision-ground stainless steel top with sealed threaded mounting holes
ジョイントタイプ	Bonded honeycomb sandwich top mounted on pneumatic isolators with bolted frame braces and adjustable leveling feet
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

M6 or 1/4-20 mounting gridPassive or self-leveling pneumatic isolatorsTuned or active damping modulesCustom tabletop dimensions and cleanroom finishes

Planning a Optical Vibration Isolation Table specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する