Optical vibration isolation table complete three-quarter view with pneumatic supports

Peralatan Bilik Bersih Spesifik Industri

Jadual Pengasingan Getaran Optik

A damped steel-honeycomb optical table supported by pneumatic isolators to provide a stable precision platform for photonics, microscopy and metrology systems.

Damped Honeycomb Core
Precision Mounting Grid
Pneumatic Isolation
Self-Leveling Support

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The optical vibration isolation table combines a rigid steel honeycomb top with a precision stainless mounting surface and pneumatic supports. Internal constrained-layer damping limits structural resonance, while isolator legs reduce floor-borne vibration before it reaches sensitive optical assemblies. A sealed threaded-hole grid, rigid support frame and adjustable leveling hardware provide a practical foundation for clean laboratory and controlled manufacturing environments.

Ciri-ciri Utama

Vertically bonded steel honeycomb increases stiffness while controlling tabletop mass.

Precision threaded-hole grid supports repeatable instrument positioning across the working surface.

Pneumatic isolators attenuate common vertical and horizontal floor vibration.

Mechanical leveling feet and optional automatic valves maintain stable working height.

Kebimbangan Produk Pelanggan

Sensitive optical systems lose alignment and measurement repeatability when floor motion or tabletop resonance reaches the instrument path.

Building vibration introduces motion into high-magnification measurements.Pneumatic isolators attenuate floor-borne vibration before it reaches the tabletop.

A lightly damped surface rings after equipment adjustments.Honeycomb construction and constrained damping reduce structural response across relevant frequencies.

Inaccurate mounting patterns complicate optical alignment.A precision M6 grid provides consistent reference spacing for fixtures and stages.

Uneven floors cause tilt and isolator load imbalance.Independent leveling feet and optional self-leveling valves balance the installed system.

Permohonan yang biasa

Laser and photonics experimentsPrecision microscopy and imagingSemiconductor metrologyInterferometry and optical alignment

Parameter teknikal

Typical construction values for a cleanroom-compatible optical vibration isolation table are listed below.

Bahan Teras	Vertically bonded closed-cell steel honeycomb with constrained damping layers
Ketebalan Panel	100-460 mm tabletop thickness
Lebar berkesan	900-1800 mm working width
Panjang maksimum	Up to 4800 mm tabletop length
Keluli Menghadapi Ketebalan	4.8 mm ferromagnetic stainless steel working surface
Ketumpatan teras	180-320 kg/m³ effective steel honeycomb core density
Kekonduksian Terma	14-17 W/(m·K) for stainless working surface
Kemasan permukaan	Matte precision-ground stainless steel top with sealed threaded mounting holes
Jenis Bersatu	Bonded honeycomb sandwich top mounted on pneumatic isolators with bolted frame braces and adjustable leveling feet
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

M6 or 1/4-20 mounting gridPassive or self-leveling pneumatic isolatorsTuned or active damping modulesCustom tabletop dimensions and cleanroom finishes

Planning a Optical Vibration Isolation Table specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami