Optical vibration isolation table complete three-quarter view with pneumatic supports

Peralatan Cleanroom Spesifik Industri

Tabel Isolasi Getaran Optik

A damped steel-honeycomb optical table supported by pneumatic isolators to provide a stable precision platform for photonics, microscopy and metrology systems.

Damped Honeycomb Core
Precision Mounting Grid
Pneumatic Isolation
Self-Leveling Support

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The optical vibration isolation table combines a rigid steel honeycomb top with a precision stainless mounting surface and pneumatic supports. Internal constrained-layer damping limits structural resonance, while isolator legs reduce floor-borne vibration before it reaches sensitive optical assemblies. A sealed threaded-hole grid, rigid support frame and adjustable leveling hardware provide a practical foundation for clean laboratory and controlled manufacturing environments.

Fitur utama:

Vertically bonded steel honeycomb increases stiffness while controlling tabletop mass.

Precision threaded-hole grid supports repeatable instrument positioning across the working surface.

Pneumatic isolators attenuate common vertical and horizontal floor vibration.

Mechanical leveling feet and optional automatic valves maintain stable working height.

Kekhawatiran produk pelanggan

Sensitive optical systems lose alignment and measurement repeatability when floor motion or tabletop resonance reaches the instrument path.

Building vibration introduces motion into high-magnification measurements.Pneumatic isolators attenuate floor-borne vibration before it reaches the tabletop.

A lightly damped surface rings after equipment adjustments.Honeycomb construction and constrained damping reduce structural response across relevant frequencies.

Inaccurate mounting patterns complicate optical alignment.A precision M6 grid provides consistent reference spacing for fixtures and stages.

Uneven floors cause tilt and isolator load imbalance.Independent leveling feet and optional self-leveling valves balance the installed system.

Aplikasi yang Tipis

Laser and photonics experimentsPrecision microscopy and imagingSemiconductor metrologyInterferometry and optical alignment

Parameter teknis

Typical construction values for a cleanroom-compatible optical vibration isolation table are listed below.

Bahan inti	Vertically bonded closed-cell steel honeycomb with constrained damping layers
Ketebalan Panel (Panel Thickness)	100-460 mm tabletop thickness
Efektif lebar	900-1800 mm working width
Panjang maksimum	Up to 4800 mm tabletop length
Baja menghadap ketebalan	4.8 mm ferromagnetic stainless steel working surface
Kepadatan inti (core density)	180-320 kg/m³ effective steel honeycomb core density
Konduktivitas Termal (Thermal Conductivity)	14-17 W/(m·K) for stainless working surface
Permukaan selesai	Matte precision-ground stainless steel top with sealed threaded mounting holes
Jenis Bersama	Bonded honeycomb sandwich top mounted on pneumatic isolators with bolted frame braces and adjustable leveling feet
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

M6 or 1/4-20 mounting gridPassive or self-leveling pneumatic isolatorsTuned or active damping modulesCustom tabletop dimensions and cleanroom finishes

Planning a Optical Vibration Isolation Table specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami