English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات الغرف النظيفة المحددة للصناعة
O الجدول عزل الاهتزاز البصري
A damped steel-honeycomb optical table supported by pneumatic isolators to provide a stable precision platform for photonics, microscopy and metrology systems.
- Damped Honeycomb Core
- Precision Mounting Grid
- Pneumatic Isolation
- Self-Leveling Support
مقدمة المنتج
The optical vibration isolation table combines a rigid steel honeycomb top with a precision stainless mounting surface and pneumatic supports. Internal constrained-layer damping limits structural resonance, while isolator legs reduce floor-borne vibration before it reaches sensitive optical assemblies. A sealed threaded-hole grid, rigid support frame and adjustable leveling hardware provide a practical foundation for clean laboratory and controlled manufacturing environments.
الخصائص الرئيسية
Precision threaded-hole grid supports repeatable instrument positioning across the working surface.
Pneumatic isolators attenuate common vertical and horizontal floor vibration.
Mechanical leveling feet and optional automatic valves maintain stable working height.
مخاوف المنتج للعملاء
Sensitive optical systems lose alignment and measurement repeatability when floor motion or tabletop resonance reaches the instrument path.
Building vibration introduces motion into high-magnification measurements.Pneumatic isolators attenuate floor-borne vibration before it reaches the tabletop.
A lightly damped surface rings after equipment adjustments.Honeycomb construction and constrained damping reduce structural response across relevant frequencies.
Inaccurate mounting patterns complicate optical alignment.A precision M6 grid provides consistent reference spacing for fixtures and stages.
Uneven floors cause tilt and isolator load imbalance.Independent leveling feet and optional self-leveling valves balance the installed system.
تطبيقات نموذجية
Laser and photonics experimentsPrecision microscopy and imagingSemiconductor metrologyInterferometry and optical alignment
المعلمات الفنية
Typical construction values for a cleanroom-compatible optical vibration isolation table are listed below.
| المواد الأساسية | Vertically bonded closed-cell steel honeycomb with constrained damping layers |
|---|---|
| سمك اللوحة | 100-460 mm tabletop thickness |
| العرض الفعال | 900-1800 mm working width |
| الحد الأقصى الطول | Up to 4800 mm tabletop length |
| الصلب يواجه سمك | 4.8 mm ferromagnetic stainless steel working surface |
| الكثافة الأساسية | 180-320 kg/m³ effective steel honeycomb core density |
| الموصلية الحرارية | 14-17 W/(m·K) for stainless working surface |
| إنهاء السطح | Matte precision-ground stainless steel top with sealed threaded mounting holes |
| نوع المشترك | Bonded honeycomb sandwich top mounted on pneumatic isolators with bolted frame braces and adjustable leveling feet |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
M6 or 1/4-20 mounting gridPassive or self-leveling pneumatic isolatorsTuned or active damping modulesCustom tabletop dimensions and cleanroom finishes
Planning a Optical Vibration Isolation Table specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
