Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Branchenspezifische Reinraumausrüstung
Optische Vibrationsisolierungstisch
A damped steel-honeycomb optical table supported by pneumatic isolators to provide a stable precision platform for photonics, microscopy and metrology systems.
- Damped Honeycomb Core
- Precision Mounting Grid
- Pneumatic Isolation
- Self-Leveling Support
Produkteinführung
The optical vibration isolation table combines a rigid steel honeycomb top with a precision stainless mounting surface and pneumatic supports. Internal constrained-layer damping limits structural resonance, while isolator legs reduce floor-borne vibration before it reaches sensitive optical assemblies. A sealed threaded-hole grid, rigid support frame and adjustable leveling hardware provide a practical foundation for clean laboratory and controlled manufacturing environments.
Key Features
Precision threaded-hole grid supports repeatable instrument positioning across the working surface.
Pneumatic isolators attenuate common vertical and horizontal floor vibration.
Mechanical leveling feet and optional automatic valves maintain stable working height.
Kunden Produktbedenken
Sensitive optical systems lose alignment and measurement repeatability when floor motion or tabletop resonance reaches the instrument path.
Building vibration introduces motion into high-magnification measurements.Pneumatic isolators attenuate floor-borne vibration before it reaches the tabletop.
A lightly damped surface rings after equipment adjustments.Honeycomb construction and constrained damping reduce structural response across relevant frequencies.
Inaccurate mounting patterns complicate optical alignment.A precision M6 grid provides consistent reference spacing for fixtures and stages.
Uneven floors cause tilt and isolator load imbalance.Independent leveling feet and optional self-leveling valves balance the installed system.
Typische Anwendungen
Laser and photonics experimentsPrecision microscopy and imagingSemiconductor metrologyInterferometry and optical alignment
Technische Parameter
Typical construction values for a cleanroom-compatible optical vibration isolation table are listed below.
| Core Material | Vertically bonded closed-cell steel honeycomb with constrained damping layers |
|---|---|
| Panel Dicke | 100-460 mm tabletop thickness |
| Effektive Breite | 900-1800 mm working width |
| Maximale Länge | Up to 4800 mm tabletop length |
| Stahl facing Dicke | 4.8 mm ferromagnetic stainless steel working surface |
| Kerndichte | 180-320 kg/m³ effective steel honeycomb core density |
| Thermische Leitfähigkeit | 14-17 W/(m·K) for stainless working surface |
| Oberfläche Finish | Matte precision-ground stainless steel top with sealed threaded mounting holes |
| Gemeinsamer Typ | Bonded honeycomb sandwich top mounted on pneumatic isolators with bolted frame braces and adjustable leveling feet |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
M6 or 1/4-20 mounting gridPassive or self-leveling pneumatic isolatorsTuned or active damping modulesCustom tabletop dimensions and cleanroom finishes
Planning a Optical Vibration Isolation Table specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
