Optical vibration isolation table complete three-quarter view with pneumatic supports

Оборудование для чистых помещений

Таблица оптической вибрационной изоляции

A damped steel-honeycomb optical table supported by pneumatic isolators to provide a stable precision platform for photonics, microscopy and metrology systems.

Damped Honeycomb Core
Precision Mounting Grid
Pneumatic Isolation
Self-Leveling Support

Запрос котировки Просмотреть продукты

Введение продукции

The optical vibration isolation table combines a rigid steel honeycomb top with a precision stainless mounting surface and pneumatic supports. Internal constrained-layer damping limits structural resonance, while isolator legs reduce floor-borne vibration before it reaches sensitive optical assemblies. A sealed threaded-hole grid, rigid support frame and adjustable leveling hardware provide a practical foundation for clean laboratory and controlled manufacturing environments.

Основные характеристики

Vertically bonded steel honeycomb increases stiffness while controlling tabletop mass.

Precision threaded-hole grid supports repeatable instrument positioning across the working surface.

Pneumatic isolators attenuate common vertical and horizontal floor vibration.

Mechanical leveling feet and optional automatic valves maintain stable working height.

Обеспокоенность клиентов продуктами

Sensitive optical systems lose alignment and measurement repeatability when floor motion or tabletop resonance reaches the instrument path.

Building vibration introduces motion into high-magnification measurements.Pneumatic isolators attenuate floor-borne vibration before it reaches the tabletop.

A lightly damped surface rings after equipment adjustments.Honeycomb construction and constrained damping reduce structural response across relevant frequencies.

Inaccurate mounting patterns complicate optical alignment.A precision M6 grid provides consistent reference spacing for fixtures and stages.

Uneven floors cause tilt and isolator load imbalance.Independent leveling feet and optional self-leveling valves balance the installed system.

Типичные приложения

Laser and photonics experimentsPrecision microscopy and imagingSemiconductor metrologyInterferometry and optical alignment

Технические параметры

Typical construction values for a cleanroom-compatible optical vibration isolation table are listed below.

Основной материал	Vertically bonded closed-cell steel honeycomb with constrained damping layers
Толщина панели	100-460 mm tabletop thickness
эффективная ширина	900-1800 mm working width
Максимальная длина	Up to 4800 mm tabletop length
Толщина линий стали	4.8 mm ferromagnetic stainless steel working surface
Плотность ядра	180-320 kg/m³ effective steel honeycomb core density
Теплопроводимость	14-17 W/(m·K) for stainless working surface
Поверхностная отделка	Matte precision-ground stainless steel top with sealed threaded mounting holes
Объединенный тип	Bonded honeycomb sandwich top mounted on pneumatic isolators with bolted frame braces and adjustable leveling feet
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

M6 or 1/4-20 mounting gridPassive or self-leveling pneumatic isolatorsTuned or active damping modulesCustom tabletop dimensions and cleanroom finishes

Planning a Optical Vibration Isolation Table specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой