Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Fluxo laminar e equipamentos de contenção
Z Amostragem Mobile Booth
A self-contained wheeled downflow booth that brings a controlled powder-sampling zone to drums, bags or containers in changing warehouse locations.
- Move-to-Material Format
- Self-Contained Downflow
- Lockable Stabilizing Casters
- Contained Filter Service Option
Introdução do produto
The mobile sampling booth combines a compact supply plenum, low return wall and filtered recirculation path on a reinforced wheeled base. It can be positioned around a drum or sampling table, stabilized with caster brakes and connected to facility power at the selected location. Clear side panels preserve visibility around warehouse traffic, while the rear return wall draws released powder away from the operator. The enclosure is relocated only after the sampling area has been closed and cleaned.
Características-chave
Low rear grilles collect powder near the container opening.
Clear side panels show adjacent warehouse traffic without opening the work zone.
Outriggers or leveling pads stabilize the booth during sampling.
Contained filter bags can reduce exposure when dusty prefilters are removed.
Preocupações do produto do cliente
Warehouse sampling changes location frequently, but the airflow boundary and booth stability must remain repeatable around each container.
Materials are stored too far apart for a fixed sampling room.The compact booth rolls to the selected container location.
Caster movement changes the booth position during sampling.Four brakes and adjustable stabilizers lock the chassis after alignment.
Warehouse cross-traffic disturbs the open sampling face.Clear side screens and controlled inward airflow shield the active container.
Dusty filters must be carried through the warehouse.An optional contained change collar encloses the filter before removal.
Aplicações típicas
Warehouse drum samplingIncoming raw-material checksBagged powder samplingTemporary subdivision tasks
Parâmetros técnicos
Typical configurable construction ranges for a mobile raw-material sampling booth are listed below.
| Material principal | SUS304 work-zone liner on a powder-coated steel mobile frame with mineral-wool plenum insulation |
|---|---|
| Painel de espessura | 50-75 mm insulated supply and return panels |
| Largura efetiva | 1200-2500 mm clear sampling width |
| Comprimento máximo | Up to 3000 mm overall mobile booth depth |
| Aço enfrentando espessura | 1.0-1.2 mm SUS304 inner facing; 0.8-1.0 mm coated outer steel |
| Densidade Core | 80-120 kg/m³ mineral-wool infill |
| Condutividade térmica | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Superfície acabado | Brushed SUS304 work zone with white powder-coated mobile exterior |
| Tipo conjunto | Sealed modular panels on a welded caster chassis with gasketed filter access doors |
| Customização | Disponível com base na aplicação pretendida e no ambiente operacional. |
Opções disponíveis
Battery or facility-power configurationRigid clear side panelsIntegrated sampling tableBag-in/bag-out filter change
Planning a Mobile Sampling Booth specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
