English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
موبايل كشك العينات
A self-contained wheeled downflow booth that brings a controlled powder-sampling zone to drums, bags or containers in changing warehouse locations.
- Move-to-Material Format
- Self-Contained Downflow
- Lockable Stabilizing Casters
- Contained Filter Service Option
مقدمة المنتج
The mobile sampling booth combines a compact supply plenum, low return wall and filtered recirculation path on a reinforced wheeled base. It can be positioned around a drum or sampling table, stabilized with caster brakes and connected to facility power at the selected location. Clear side panels preserve visibility around warehouse traffic, while the rear return wall draws released powder away from the operator. The enclosure is relocated only after the sampling area has been closed and cleaned.
الخصائص الرئيسية
Low rear grilles collect powder near the container opening.
Clear side panels show adjacent warehouse traffic without opening the work zone.
Outriggers or leveling pads stabilize the booth during sampling.
Contained filter bags can reduce exposure when dusty prefilters are removed.
مخاوف المنتج للعملاء
Warehouse sampling changes location frequently, but the airflow boundary and booth stability must remain repeatable around each container.
Materials are stored too far apart for a fixed sampling room.The compact booth rolls to the selected container location.
Caster movement changes the booth position during sampling.Four brakes and adjustable stabilizers lock the chassis after alignment.
Warehouse cross-traffic disturbs the open sampling face.Clear side screens and controlled inward airflow shield the active container.
Dusty filters must be carried through the warehouse.An optional contained change collar encloses the filter before removal.
تطبيقات نموذجية
Warehouse drum samplingIncoming raw-material checksBagged powder samplingTemporary subdivision tasks
المعلمات الفنية
Typical configurable construction ranges for a mobile raw-material sampling booth are listed below.
| المواد الأساسية | SUS304 work-zone liner on a powder-coated steel mobile frame with mineral-wool plenum insulation |
|---|---|
| سمك اللوحة | 50-75 mm insulated supply and return panels |
| العرض الفعال | 1200-2500 mm clear sampling width |
| الحد الأقصى الطول | Up to 3000 mm overall mobile booth depth |
| الصلب يواجه سمك | 1.0-1.2 mm SUS304 inner facing; 0.8-1.0 mm coated outer steel |
| الكثافة الأساسية | 80-120 kg/m³ mineral-wool infill |
| الموصلية الحرارية | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| إنهاء السطح | Brushed SUS304 work zone with white powder-coated mobile exterior |
| نوع المشترك | Sealed modular panels on a welded caster chassis with gasketed filter access doors |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Battery or facility-power configurationRigid clear side panelsIntegrated sampling tableBag-in/bag-out filter change
Planning a Mobile Sampling Booth specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
