İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Laminar Flow ve Containment Equipment
Mobil Örnekleme Booth
A self-contained wheeled downflow booth that brings a controlled powder-sampling zone to drums, bags or containers in changing warehouse locations.
- Move-to-Material Format
- Self-Contained Downflow
- Lockable Stabilizing Casters
- Contained Filter Service Option
Ürün tanıtımı
The mobile sampling booth combines a compact supply plenum, low return wall and filtered recirculation path on a reinforced wheeled base. It can be positioned around a drum or sampling table, stabilized with caster brakes and connected to facility power at the selected location. Clear side panels preserve visibility around warehouse traffic, while the rear return wall draws released powder away from the operator. The enclosure is relocated only after the sampling area has been closed and cleaned.
Ana Özellikler
Low rear grilles collect powder near the container opening.
Clear side panels show adjacent warehouse traffic without opening the work zone.
Outriggers or leveling pads stabilize the booth during sampling.
Contained filter bags can reduce exposure when dusty prefilters are removed.
Müşteri Ürün Sorunları
Warehouse sampling changes location frequently, but the airflow boundary and booth stability must remain repeatable around each container.
Materials are stored too far apart for a fixed sampling room.The compact booth rolls to the selected container location.
Caster movement changes the booth position during sampling.Four brakes and adjustable stabilizers lock the chassis after alignment.
Warehouse cross-traffic disturbs the open sampling face.Clear side screens and controlled inward airflow shield the active container.
Dusty filters must be carried through the warehouse.An optional contained change collar encloses the filter before removal.
Tipik uygulamalar
Warehouse drum samplingIncoming raw-material checksBagged powder samplingTemporary subdivision tasks
Teknik parametreler
Typical configurable construction ranges for a mobile raw-material sampling booth are listed below.
| Temel malzemeler | SUS304 work-zone liner on a powder-coated steel mobile frame with mineral-wool plenum insulation |
|---|---|
| Panel kalınlığı | 50-75 mm insulated supply and return panels |
| Effective Width (Etkili Genişlik) | 1200-2500 mm clear sampling width |
| Maksimum uzunluk | Up to 3000 mm overall mobile booth depth |
| Çelik yüz yüze kalınlığı | 1.0-1.2 mm SUS304 inner facing; 0.8-1.0 mm coated outer steel |
| Core Density (Çekirdek Yoğunluğu) | 80-120 kg/m³ mineral-wool infill |
| Termal İletkenlik | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Yüzey bitirme | Brushed SUS304 work zone with white powder-coated mobile exterior |
| Ortak tip | Sealed modular panels on a welded caster chassis with gasketed filter access doors |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Battery or facility-power configurationRigid clear side panelsIntegrated sampling tableBag-in/bag-out filter change
Planning a Mobile Sampling Booth specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
