Complete mobile sampling booth on lockable cleanroom casters

層流 · 封じ込め装置

モバイルサンプリングブース

A self-contained wheeled downflow booth that brings a controlled powder-sampling zone to drums, bags or containers in changing warehouse locations.

Move-to-Material Format
Self-Contained Downflow
Lockable Stabilizing Casters
Contained Filter Service Option

見積もりリクエスト製品案内

商品紹介

The mobile sampling booth combines a compact supply plenum, low return wall and filtered recirculation path on a reinforced wheeled base. It can be positioned around a drum or sampling table, stabilized with caster brakes and connected to facility power at the selected location. Clear side panels preserve visibility around warehouse traffic, while the rear return wall draws released powder away from the operator. The enclosure is relocated only after the sampling area has been closed and cleaned.

主要な特徴

A compact wheeled chassis brings the sampling zone to stored raw materials.

Low rear grilles collect powder near the container opening.

Clear side panels show adjacent warehouse traffic without opening the work zone.

Outriggers or leveling pads stabilize the booth during sampling.

Contained filter bags can reduce exposure when dusty prefilters are removed.

お客様の製品に関する懸念事項

Warehouse sampling changes location frequently, but the airflow boundary and booth stability must remain repeatable around each container.

Materials are stored too far apart for a fixed sampling room.The compact booth rolls to the selected container location.

Caster movement changes the booth position during sampling.Four brakes and adjustable stabilizers lock the chassis after alignment.

Warehouse cross-traffic disturbs the open sampling face.Clear side screens and controlled inward airflow shield the active container.

Dusty filters must be carried through the warehouse.An optional contained change collar encloses the filter before removal.

典型的な用途

Warehouse drum samplingIncoming raw-material checksBagged powder samplingTemporary subdivision tasks

技術的なパラメータ

Typical configurable construction ranges for a mobile raw-material sampling booth are listed below.

コア材料	SUS304 work-zone liner on a powder-coated steel mobile frame with mineral-wool plenum insulation
パネルの厚さ	50-75 mm insulated supply and return panels
有効幅	1200-2500 mm clear sampling width
最大長さ	Up to 3000 mm overall mobile booth depth
鋼鉄の厚さを直面する	1.0-1.2 mm SUS304 inner facing; 0.8-1.0 mm coated outer steel
コア密度	80-120 kg/m³ mineral-wool infill
熱伝導率	0.035-0.045 W/(m·K) for the mineral-wool infill
表面仕上げ	Brushed SUS304 work zone with white powder-coated mobile exterior
ジョイントタイプ	Sealed modular panels on a welded caster chassis with gasketed filter access doors
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Battery or facility-power configurationRigid clear side panelsIntegrated sampling tableBag-in/bag-out filter change

Planning a Mobile Sampling Booth specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する