Complete mobile sampling booth on lockable cleanroom casters

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

모바일 샘플링 부스

A self-contained wheeled downflow booth that brings a controlled powder-sampling zone to drums, bags or containers in changing warehouse locations.

Move-to-Material Format
Self-Contained Downflow
Lockable Stabilizing Casters
Contained Filter Service Option

견적 요청 제품 찾아보기

상품 소개

The mobile sampling booth combines a compact supply plenum, low return wall and filtered recirculation path on a reinforced wheeled base. It can be positioned around a drum or sampling table, stabilized with caster brakes and connected to facility power at the selected location. Clear side panels preserve visibility around warehouse traffic, while the rear return wall draws released powder away from the operator. The enclosure is relocated only after the sampling area has been closed and cleaned.

주요 기능

A compact wheeled chassis brings the sampling zone to stored raw materials.

Low rear grilles collect powder near the container opening.

Clear side panels show adjacent warehouse traffic without opening the work zone.

Outriggers or leveling pads stabilize the booth during sampling.

Contained filter bags can reduce exposure when dusty prefilters are removed.

고객 제품 관심사

Warehouse sampling changes location frequently, but the airflow boundary and booth stability must remain repeatable around each container.

Materials are stored too far apart for a fixed sampling room.The compact booth rolls to the selected container location.

Caster movement changes the booth position during sampling.Four brakes and adjustable stabilizers lock the chassis after alignment.

Warehouse cross-traffic disturbs the open sampling face.Clear side screens and controlled inward airflow shield the active container.

Dusty filters must be carried through the warehouse.An optional contained change collar encloses the filter before removal.

일반적인 응용 프로그램

Warehouse drum samplingIncoming raw-material checksBagged powder samplingTemporary subdivision tasks

기술 매개변수

Typical configurable construction ranges for a mobile raw-material sampling booth are listed below.

핵심 재료	SUS304 work-zone liner on a powder-coated steel mobile frame with mineral-wool plenum insulation
패널 두께	50-75 mm insulated supply and return panels
유효 폭	1200-2500 mm clear sampling width
최대 길이	Up to 3000 mm overall mobile booth depth
강철 면면 두께	1.0-1.2 mm SUS304 inner facing; 0.8-1.0 mm coated outer steel
코어 밀도	80-120 kg/m³ mineral-wool infill
열전도도 (Thermal Conductivity)	0.035-0.045 W/(m·K) for the mineral-wool infill
표면 마무리	Brushed SUS304 work zone with white powder-coated mobile exterior
접합 유형	Sealed modular panels on a welded caster chassis with gasketed filter access doors
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Battery or facility-power configurationRigid clear side panelsIntegrated sampling tableBag-in/bag-out filter change

Planning a Mobile Sampling Booth specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.