Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Equipos de flujo laminar y contención
Muestreo móvil Booth
A self-contained wheeled downflow booth that brings a controlled powder-sampling zone to drums, bags or containers in changing warehouse locations.
- Move-to-Material Format
- Self-Contained Downflow
- Lockable Stabilizing Casters
- Contained Filter Service Option
Introducción del producto
The mobile sampling booth combines a compact supply plenum, low return wall and filtered recirculation path on a reinforced wheeled base. It can be positioned around a drum or sampling table, stabilized with caster brakes and connected to facility power at the selected location. Clear side panels preserve visibility around warehouse traffic, while the rear return wall draws released powder away from the operator. The enclosure is relocated only after the sampling area has been closed and cleaned.
Características clave
Low rear grilles collect powder near the container opening.
Clear side panels show adjacent warehouse traffic without opening the work zone.
Outriggers or leveling pads stabilize the booth during sampling.
Contained filter bags can reduce exposure when dusty prefilters are removed.
Preocupaciones del producto del cliente
Warehouse sampling changes location frequently, but the airflow boundary and booth stability must remain repeatable around each container.
Materials are stored too far apart for a fixed sampling room.The compact booth rolls to the selected container location.
Caster movement changes the booth position during sampling.Four brakes and adjustable stabilizers lock the chassis after alignment.
Warehouse cross-traffic disturbs the open sampling face.Clear side screens and controlled inward airflow shield the active container.
Dusty filters must be carried through the warehouse.An optional contained change collar encloses the filter before removal.
Aplicaciones típicas
Warehouse drum samplingIncoming raw-material checksBagged powder samplingTemporary subdivision tasks
Parámetros técnicos
Typical configurable construction ranges for a mobile raw-material sampling booth are listed below.
| Materiales Core | SUS304 work-zone liner on a powder-coated steel mobile frame with mineral-wool plenum insulation |
|---|---|
| Panel de espesor | 50-75 mm insulated supply and return panels |
| Ancho efectivo | 1200-2500 mm clear sampling width |
| Longitud máxima | Up to 3000 mm overall mobile booth depth |
| Acero frente a espesor | 1.0-1.2 mm SUS304 inner facing; 0.8-1.0 mm coated outer steel |
| Densidad Core | 80-120 kg/m³ mineral-wool infill |
| Conductividad térmica | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Superficie acabada | Brushed SUS304 work zone with white powder-coated mobile exterior |
| Tipo conjunto | Sealed modular panels on a welded caster chassis with gasketed filter access doors |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Battery or facility-power configurationRigid clear side panelsIntegrated sampling tableBag-in/bag-out filter change
Planning a Mobile Sampling Booth specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
