Englisch
DeutschCurrent
Arabisch
Französisch
indonesisch
Japanisch
Koreanisch
Malaiisch
Portugiesisch
Russisch
Spanisch
Thailändisch
Türkischer Sprache
Vietnamesisch
Laminar Flow und Containment Equipment
Mobile Sampling Booth
A self-contained wheeled downflow booth that brings a controlled powder-sampling zone to drums, bags or containers in changing warehouse locations.
- Move-to-Material Format
- Self-Contained Downflow
- Lockable Stabilizing Casters
- Contained Filter Service Option
Produkteinführung
The mobile sampling booth combines a compact supply plenum, low return wall and filtered recirculation path on a reinforced wheeled base. It can be positioned around a drum or sampling table, stabilized with caster brakes and connected to facility power at the selected location. Clear side panels preserve visibility around warehouse traffic, while the rear return wall draws released powder away from the operator. The enclosure is relocated only after the sampling area has been closed and cleaned.
Key Features
Low rear grilles collect powder near the container opening.
Clear side panels show adjacent warehouse traffic without opening the work zone.
Outriggers or leveling pads stabilize the booth during sampling.
Contained filter bags can reduce exposure when dusty prefilters are removed.
Kunden Produktbedenken
Warehouse sampling changes location frequently, but the airflow boundary and booth stability must remain repeatable around each container.
Materials are stored too far apart for a fixed sampling room.The compact booth rolls to the selected container location.
Caster movement changes the booth position during sampling.Four brakes and adjustable stabilizers lock the chassis after alignment.
Warehouse cross-traffic disturbs the open sampling face.Clear side screens and controlled inward airflow shield the active container.
Dusty filters must be carried through the warehouse.An optional contained change collar encloses the filter before removal.
Typische Anwendungen
Warehouse drum samplingIncoming raw-material checksBagged powder samplingTemporary subdivision tasks
Technische Parameter
Typical configurable construction ranges for a mobile raw-material sampling booth are listed below.
| Core Material | SUS304 work-zone liner on a powder-coated steel mobile frame with mineral-wool plenum insulation |
|---|---|
| Panel Dicke | 50-75 mm insulated supply and return panels |
| Effektive Breite | 1200-2500 mm clear sampling width |
| Maximale Länge | Up to 3000 mm overall mobile booth depth |
| Stahl facing Dicke | 1.0-1.2 mm SUS304 inner facing; 0.8-1.0 mm coated outer steel |
| Kerndichte | 80-120 kg/m³ mineral-wool infill |
| Thermische Leitfähigkeit | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Oberfläche Finish | Brushed SUS304 work zone with white powder-coated mobile exterior |
| Gemeinsamer Typ | Sealed modular panels on a welded caster chassis with gasketed filter access doors |
| Customisierung | Verfügbar je nach beabsichtigter Anwendung und Betriebsumgebung. |
Verfügbare Optionen
Battery or facility-power configurationRigid clear side panelsIntegrated sampling tableBag-in/bag-out filter change
Planning a Mobile Sampling Booth specification?
Senden Sie uns Ihre Abmessungen, Installationsbedingungen, Leistungsziele und gewünschte Oberflächenveredelung.
