English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Оборудование для ламинарного потока и ограничения
Мобильный стенд для отбора проб
A self-contained wheeled downflow booth that brings a controlled powder-sampling zone to drums, bags or containers in changing warehouse locations.
- Move-to-Material Format
- Self-Contained Downflow
- Lockable Stabilizing Casters
- Contained Filter Service Option
Введение продукции
The mobile sampling booth combines a compact supply plenum, low return wall and filtered recirculation path on a reinforced wheeled base. It can be positioned around a drum or sampling table, stabilized with caster brakes and connected to facility power at the selected location. Clear side panels preserve visibility around warehouse traffic, while the rear return wall draws released powder away from the operator. The enclosure is relocated only after the sampling area has been closed and cleaned.
Основные характеристики
Low rear grilles collect powder near the container opening.
Clear side panels show adjacent warehouse traffic without opening the work zone.
Outriggers or leveling pads stabilize the booth during sampling.
Contained filter bags can reduce exposure when dusty prefilters are removed.
Обеспокоенность клиентов продуктами
Warehouse sampling changes location frequently, but the airflow boundary and booth stability must remain repeatable around each container.
Materials are stored too far apart for a fixed sampling room.The compact booth rolls to the selected container location.
Caster movement changes the booth position during sampling.Four brakes and adjustable stabilizers lock the chassis after alignment.
Warehouse cross-traffic disturbs the open sampling face.Clear side screens and controlled inward airflow shield the active container.
Dusty filters must be carried through the warehouse.An optional contained change collar encloses the filter before removal.
Типичные приложения
Warehouse drum samplingIncoming raw-material checksBagged powder samplingTemporary subdivision tasks
Технические параметры
Typical configurable construction ranges for a mobile raw-material sampling booth are listed below.
| Основной материал | SUS304 work-zone liner on a powder-coated steel mobile frame with mineral-wool plenum insulation |
|---|---|
| Толщина панели | 50-75 mm insulated supply and return panels |
| эффективная ширина | 1200-2500 mm clear sampling width |
| Максимальная длина | Up to 3000 mm overall mobile booth depth |
| Толщина линий стали | 1.0-1.2 mm SUS304 inner facing; 0.8-1.0 mm coated outer steel |
| Плотность ядра | 80-120 kg/m³ mineral-wool infill |
| Теплопроводимость | 0.035-0.045 W/(m·K) for the mineral-wool infill |
| Поверхностная отделка | Brushed SUS304 work zone with white powder-coated mobile exterior |
| Объединенный тип | Sealed modular panels on a welded caster chassis with gasketed filter access doors |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
Battery or facility-power configurationRigid clear side panelsIntegrated sampling tableBag-in/bag-out filter change
Planning a Mobile Sampling Booth specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
