Inglês
Alemão
Língua árabe
Francês
Língua indonésia
Japonês
Coreano
Língua malaia
Portuguêsatual
Língua russa
Espanhol
Tailandês
Língua turca
Vietnã
Sistemas de parede e teto para sala limpa
Painel de parede de sala limpa HPL-Faced
A rigid modular wall panel finished with compact high-pressure laminate, providing a hard, scratch-resistant and chemically tolerant surface for laboratories, healthcare rooms and high-contact clean environments.
- Compact HPL Surface
- Scratch-Resistant Wall Face
- Broad Color Selection
- Protected Flush Edges
Introdução do produto
HPL-Faced Cleanroom Wall Panels use compact high-pressure laminate as the visible room surface over a rigid framed sandwich substrate. Thermoset resins and compressed kraft layers give HPL a hard, non-porous face that withstands abrasion and many commonly used laboratory cleaners. The thicker decorative layer also hides small substrate imperfections better than thin painted steel. Aluminum perimeter profiles protect cut edges, align modules and receive a continuous hygienic seal. This panel is intended primarily for walls and partitions where impact durability and finish choice are important.
Características-chave
Color-through or decorative sheets offer a wide visual range without exposed porous material.
The non-porous laminate face supports routine wiping and spill removal.
Aluminum edge profiles protect the laminate from chipping at panel joints.
Rigid framed construction allows damaged wall modules to be replaced individually.
Preocupações do produto do cliente
Correct HPL selection depends on chemical exposure, edge protection, scratch duty and the support provided by the substrate.
Thin painted skins show scratches quickly in trolley and equipment routes.A thicker HPL surface resists routine scuffing and retains a consistent decorative finish.
Unprotected laminate edges can chip or absorb liquid after impact.Closed aluminum profiles shield cut edges and keep cleaning fluids away from the substrate.
Not every HPL grade tolerates every solvent or disinfectant.The exposed laminate grade is matched to the actual chemical list and contact duration.
A flexible backing makes hard laminate sound hollow and crack around fittings.Continuous rigid support and local inserts stabilize the facing around mounted accessories.
Aplicações típicas
Laboratory wet and dry roomsHealthcare clean corridorsPharmaceutical support spacesFood quality-control roomsHigh-contact cleanroom partitions
Parâmetros técnicos
Typical HPL-faced cleanroom wall panel construction ranges are shown below.
| Material principal | Rock wool or aluminum honeycomb in a four-sided frame |
|---|---|
| Painel de espessura | 50, 75 or 100 mm |
| Largura efetiva | 1000, 1180 or 1200 mm |
| Comprimento máximo | 6000 mm |
| Aço enfrentando espessura | 0.50 mm galvanized steel backing beneath 4–6 mm HPL |
| Densidade Core | 100–140 kg/m³ rock wool or approximately 27 kg/m³ aluminum honeycomb |
| Condutividade térmica | 0.040–0.150 W/(m·K), depending on the selected core |
| Superfície acabado | Compact HPL meeting EN 438 or ISO 4586 surface requirements |
| Tipo conjunto | Aluminum-framed flush joint with hygienic sealant |
| Customização | Disponível com base na aplicação pretendida e ambiente operacional |
Opções disponíveis
Chemical-resistant laboratory HPLAntibacterial HPL surfaceRock wool or aluminum honeycomb coreCustom color and texture
Planning a HPL-Faced Cleanroom Wall Panel specification?
Envie-nos as suas dimensões, condições de instalação, metas de desempenho e acabamento de superfície necessário.
