Complete HPL-faced cleanroom wall panel with protected aluminum edges

クリーンルームの壁と天井システム

HPL 面のクリーンルームの壁パネル

A rigid modular wall panel finished with compact high-pressure laminate, providing a hard, scratch-resistant and chemically tolerant surface for laboratories, healthcare rooms and high-contact clean environments.

Compact HPL Surface
Scratch-Resistant Wall Face
Broad Color Selection
Protected Flush Edges

見積もりリクエスト製品案内

商品紹介

HPL-Faced Cleanroom Wall Panels use compact high-pressure laminate as the visible room surface over a rigid framed sandwich substrate. Thermoset resins and compressed kraft layers give HPL a hard, non-porous face that withstands abrasion and many commonly used laboratory cleaners. The thicker decorative layer also hides small substrate imperfections better than thin painted steel. Aluminum perimeter profiles protect cut edges, align modules and receive a continuous hygienic seal. This panel is intended primarily for walls and partitions where impact durability and finish choice are important.

主要な特徴

Compact HPL provides a hard wearing surface with better scratch resistance than thin paint coatings.

Color-through or decorative sheets offer a wide visual range without exposed porous material.

The non-porous laminate face supports routine wiping and spill removal.

Aluminum edge profiles protect the laminate from chipping at panel joints.

Rigid framed construction allows damaged wall modules to be replaced individually.

お客様の製品に関する懸念事項

Correct HPL selection depends on chemical exposure, edge protection, scratch duty and the support provided by the substrate.

Thin painted skins show scratches quickly in trolley and equipment routes.A thicker HPL surface resists routine scuffing and retains a consistent decorative finish.

Unprotected laminate edges can chip or absorb liquid after impact.Closed aluminum profiles shield cut edges and keep cleaning fluids away from the substrate.

Not every HPL grade tolerates every solvent or disinfectant.The exposed laminate grade is matched to the actual chemical list and contact duration.

A flexible backing makes hard laminate sound hollow and crack around fittings.Continuous rigid support and local inserts stabilize the facing around mounted accessories.

典型的な用途

Laboratory wet and dry roomsHealthcare clean corridors医薬品サポートスペースFood quality-control roomsHigh-contact cleanroom partitions

技術的なパラメータ

Typical HPL-faced cleanroom wall panel construction ranges are shown below.

コア材料	Rock wool or aluminum honeycomb in a four-sided frame
パネルの厚さ	50 、 75 または 100 の mm
有効幅	1000, 1180 or 1200 mm
最大長さ	6000 mm
鋼鉄の厚さを直面する	0.50 mm galvanized steel backing beneath 4–6 mm HPL
コア密度	100–140 kg/m³ rock wool or approximately 27 kg/m³ aluminum honeycomb
熱伝導率	0.040–0.150 W/(m·K), depending on the selected core
表面仕上げ	Compact HPL meeting EN 438 or ISO 4586 surface requirements
ジョイントタイプ	Aluminum-framed flush joint with hygienic sealant
カスタマイズ	目的のアプリケーションおよび動作環境に基づいて利用可能

利用可能なオプション

Chemical-resistant laboratory HPLAntibacterial HPL surfaceRock wool or aluminum honeycomb coreCustom color and texture

Planning a HPL-Faced Cleanroom Wall Panel specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する