Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Panel de pared de sala limpia HPL-Faced
A rigid modular wall panel finished with compact high-pressure laminate, providing a hard, scratch-resistant and chemically tolerant surface for laboratories, healthcare rooms and high-contact clean environments.
- Compact HPL Surface
- Scratch-Resistant Wall Face
- Broad Color Selection
- Protected Flush Edges
Introducción del producto
HPL-Faced Cleanroom Wall Panels use compact high-pressure laminate as the visible room surface over a rigid framed sandwich substrate. Thermoset resins and compressed kraft layers give HPL a hard, non-porous face that withstands abrasion and many commonly used laboratory cleaners. The thicker decorative layer also hides small substrate imperfections better than thin painted steel. Aluminum perimeter profiles protect cut edges, align modules and receive a continuous hygienic seal. This panel is intended primarily for walls and partitions where impact durability and finish choice are important.
Características clave
Color-through or decorative sheets offer a wide visual range without exposed porous material.
The non-porous laminate face supports routine wiping and spill removal.
Aluminum edge profiles protect the laminate from chipping at panel joints.
Rigid framed construction allows damaged wall modules to be replaced individually.
Preocupaciones del producto del cliente
Correct HPL selection depends on chemical exposure, edge protection, scratch duty and the support provided by the substrate.
Thin painted skins show scratches quickly in trolley and equipment routes.A thicker HPL surface resists routine scuffing and retains a consistent decorative finish.
Unprotected laminate edges can chip or absorb liquid after impact.Closed aluminum profiles shield cut edges and keep cleaning fluids away from the substrate.
Not every HPL grade tolerates every solvent or disinfectant.The exposed laminate grade is matched to the actual chemical list and contact duration.
A flexible backing makes hard laminate sound hollow and crack around fittings.Continuous rigid support and local inserts stabilize the facing around mounted accessories.
Aplicaciones típicas
Laboratory wet and dry roomsHealthcare clean corridorsEspacios de apoyo farmacéutico
porFood quality-control roomsHigh-contact cleanroom partitions
Parámetros técnicos
Typical HPL-faced cleanroom wall panel construction ranges are shown below.
| Materiales Core | Rock wool or aluminum honeycomb in a four-sided frame |
|---|---|
| Panel de espesor | 50, 75 o 100 mm |
| Ancho efectivo | 1000, 1180 or 1200 mm |
| Longitud máxima | 6000 mm |
| Acero frente a espesor | 0.50 mm galvanized steel backing beneath 4–6 mm HPL |
| Densidad Core | 100–140 kg/m³ rock wool or approximately 27 kg/m³ aluminum honeycomb |
| Conductividad térmica | 0.040–0.150 W/(m·K), depending on the selected core |
| Superficie acabada | Compact HPL meeting EN 438 or ISO 4586 surface requirements |
| Tipo conjunto | Aluminum-framed flush joint with hygienic sealant |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Chemical-resistant laboratory HPLAntibacterial HPL surfaceRock wool or aluminum honeycomb coreCustom color and texture
Planning a HPL-Faced Cleanroom Wall Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
